424258

Olivetti fax lab 105 Manual

41
Zoom out
Zoom in
Previous page
1/60
Next page
17
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
TO ENABLE/DISABLE ECM
The ECM (Error Correction Mode) is a system for cor-
recting the errors caused by interference on the line. This
function only has effect if it has been enabled both on your
fax machine and on your correspondent's fax machine and
is indicated by a letter "E" appearing on the display.
The fax machine is set up to send documents in this mode.
However, you can set it up to send documents in normal
mode, as follows:
1. Press the key
until the display shows:
FAX SET-UP
2. Press the key:
The display shows:
DATE AND TIME
3. Press the key:
The display shows:
VARIOUS SETTINGS
4. Press the key:
The display shows:
ECM: ON
5. To view the other available option: "ECM: OFF", press the
keys:
|
/
}
6. To confirm your choice, press the key:
7. To return the fax machine to its initial stand-by mode, press
the key:
R
ECEIVING
A
DOCUMENT
IN
POLLING
MODE
FIRST OF ALL, WHAT POLLING IS
It is a transmission request that a fax machine makes to another fax
machine so that the latter sends the document requested automati-
cally.
There are two main characteristics of communication using the polling
method:
• the user who is to receive the document requests trans-
mission. In other words, a user may connect to another fax
machine and request it to send a document (specially prepared) to
him, even when the user at the other end of the line is out.
• the transaction is paid for by the person who requested
transmission (that is, the user who receives the document) and
not the person whose fax machine sends the document.
TO MAKE A TRANSMISSION REQUEST (POLLING RECEPTION)
Arrange with your correspondent the time at which you
intend to make the transmission request so that he has time
to put the document to be sent in his fax machine. Then set
up your fax machine to receive the document, by program-
ming the dialling mode to be used to call your correspond-
ent and the time at which you wish to receive the document.
1. Press the key
until the display shows:
POLLING RX
2. Press the key:
The display shows:
TYPE TIME
HH:MM
At this point, you can confirm the current time or overwrite
the time with the correct one, for example "18:20".
3. To overwrite the new time, press the keys:
-
4. To confirm both the current time and the new time, press the
key:
The display shows:
TYPE FAX NUMBER
NUM/TOUCH/SPEED
5. Dial the correspondent's number using any of the available
methods: directly on the numeric keypad or using the one-
touch dialling keys or speed dialling codes.
To do this, press the keys:
-
6. To confirm the setting, press the key:
The fax machine shows the message "POLL SET" for a few
seconds and then returns automatically to its initial stand-by
mode. The second line of the display shows: "POLL. RX:
18:20".
note
You can cancel the polling reception setting by pressing the
button.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti fax lab 105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti fax lab 105 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info