424258
43
Zoom out
Zoom in
Previous page
1/60
Next page
19
T
ROUBLESHOOTING
GUIDE
W
HAT
HAPPENS
IF
THERE
IS
A
POWER
FAILURE
If there is a power failure, the fax machine keeps the follow-
ing data in the memory: the numbers set for one-touch
and speed dialling and the reports, while the documents
present in the memory will be lost.
The date and time will also be lost so they will have to be
reset by carrying out the procedure described in the "To set
the date and time" section of the "How to get started
quickly" chapter.
W
HAT
HAPPENS
IF
THE
PAPER
OR
INK
HAS
RUN
OUT
If, during reception, the paper runs out or gets jammed,
the ink runs out, the print head compartment cover
is open, the paper support is closed or the operator
console is raised, the machine stops printing and the
display shows the relevant message and the document you
are receiving is temporarily recorded in the memory.
Once the problem has been solved, the fax machine
resumes printing.
I
F
THE
TRANSMISSION
IS
UNSUCCESSFUL
Sometimes, due to line problems such as excessively heavy
telephone traffic or any other kind of interference, the docu-
ment sent is received badly by the correspondent, who will
ask you to send it to him again.
In these cases, it is advisable to send the document again at a
slower speed. The fax machine transmits regularly at a speed
of 9600 bps (bits per second). To reduce the speed, follow the
procedure described in "To reduce the transmission
speed", chapter "More sophisticated operations".
If transmission is not completed due to errors on the line
or fax machine, the error LED " " lights up and a short
beep is emitted; in this case, the fax machine automatically
prints the transmission report (see "To print reports
and lists", chapter "Transmission and reception opera-
tions"), on which an error code indicates the cause of the
error (you will find a list of all the error codes later).
W
HAT
HAPPENS
WHEN
A
DOCUMENT
IS
PLACED
IN
THE
AUTOMATIC
DOCUMENT
FEEDER
WHILE
THE
FAX
MACHINE
IS
PRINTING
If you place a document in the automatic document feeder
while the fax machine is making a copy, printing a report or
printing a document being received, the fax machine be-
haves as follows:
if it is making a copy, the fax machine displays some
messages to prompt you to abort the copying process and
return to its initial stand-by mode;
if it is printing a report, the fax machine displays some
messages to prompt you to abort the printing process and
return to its initial stand-by mode;
if it is receiving a document:
- it stops printing and starts to save the document. The
display shows the message "RX IN MEMORY".
Having saved the document, the display shows the mes-
sage "DOC. IN MEMORY".
At this point, the fax machine will prompt you to remove the
document from the automatic document feeder (ADF). The
fax machine will then print the saved document.
F
OR
MINOR
PROBLEMS
The list below may be used as a guide to the solution of minor prob-
lems.
PROBLEM SOLUTION
The fax machine gives no
sign of life.
Check that it is connected to
the power socket.
The document is not fed in
correctly.
Check that the document
respects the
recommendations listed in
"What documents may be
used", chapter
"Transmission and
reception operations".
The fax machine will not
send a document.
Check that the document is
not jammed.
The line is busy: wait until it
is free and then try sending
the document again.
The fax machine will not
receive a document
automatically.
It is set fo r manual
reception: set it up for
automatic reception.
The fax machine will not
copy or receive documents.
Check that no documents or
sheets of paper are
jammed.
You are using an unsuitable
kind of paper: check the
characteristics of the paper
listed in the "Technical
data".
The fax machine prints blank
sheets.
Place the document in the
correct po sition with the
side to be copied facing
downwards.
NOTe
Incorrect transmission or reception by the fax machine may also
depend on factors other than those listed above, which will be sig-
nalled in the form of error codes on the "Transmission report" and
"Activity report", see "To print reports and lists", chapter "Trans-
mission and reception operations".
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti fax lab 105 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti fax lab 105 in the language / languages: English as an attachment in your email.

The manual is 4,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info