40148
31
Zoom out
Zoom in
Previous page
1/50
Next page
23
ENGLISH
Complete Electronic Journal Report
This report is a complete listing of transaction receipts and Z
financial reports taken within the maximum 13,000 line
capacity programmed.
1. Control lock key position: X or Z. Bear in mind that in the
Z position the electronic journal memory contents are
cleared. Make sure there is plenty of paper loaded in the
printer.
2. If a PRG and Z mode, or X mode, manager password was
defined type the [4-digit password] and press
.
3. Press
.
When the contents of the electronic journal are printed, a
message is displayed along with a beep to indicate that the
EJ memory capacity has been restored to its programmed
13,000 lines.
Oldest Transaction Report
By entering the number of transactions you wish to view, this
report prints the selected number of oldest receipts and Z
financial reports performed and stored within the programmed
13,000 line capacity.
1. Control lock key position: X or Z. Bear in mind that in the
Z position the journal report contents are cleared. Make
sure there is plenty of paper loaded in the printer.
2. If a PRG and Z mode, or X mode, manager password
was defined type the [4-digit password] and press
.
3. Type a number between [001 and 999] indicating the
number of oldest reports wanted and press
.
Latest Transaction Report
By entering the number of transactions you wish to view, this
report prints the most recent receipts and Z financial reports
performed and stored within the programmed 13,000 line
capacity.
1. Control lock key position: X or Z. Bear in mind that in the
Z position the journal report contents are cleared. Make
sure there is plenty of paper loaded in the printer.
2. If a PRG and Z mode, or X mode, manager password was
defined type the [4-digit password] and press .
3. Type a number between [001 and 999] indicating the
number of latest reports wanted and press
.
Daily Report
By entering the number of Z financial reports that you wish to
view, this report prints the receipts recorded before the
defined Z financial report along with the report itself.
1. Control lock key position: X or Z. Bear in mind that in the
Z position the journal report contents are cleared. Make
sure there is plenty of paper loaded in the printer.
2. If a PRG and Z mode, or X mode, manager password was
defined type the [4-digit password] and press
.
3. Type a number between [01 and 99] indicating the
number of oldest end-of-day reports wanted and press
.
Sales Transactions
Entering and Exiting the Register Mode
1. Unlock the printer compartment and turn the control lock
key to the REG mode.
2. If the Clerk System option was set to active and a clerk
code was programmed, enter the related Clerk number
assigned, press
, type the associated three-digit
secret code and then press
. If the Clerk System
option was set to active and a secret code was not
programmed, type any Clerk number and then press
.
Date and Time Display
You can display the current date and time outside of a sales
transaction and with the cash register in the REG mode.
Press
to display the date, to display the
time.
Electronic Journal Capacity Display
If the electronic journal was activated, you can also display
the number of sales data lines still available in the journal's
memory. Press
outside of a sales trans-
action and with the cash register in REG mode. The value
is displayed on the upper line of the operator display.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR6900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR6900 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR6900

Olivetti ECR6900 User Manual - German - 52 pages

Olivetti ECR6900 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info