40148

Olivetti ECR6900 Manual

30
Zoom out
Zoom in
Previous page
1/50
Next page
22
PLU Sales Report
This report provides the number of times a particular PLU is
used, the totals for that number and the sales total for all PLUs.
1. Control lock key position: X or Z (bear in mind that a Z
PLU Report resets all PLU totals to zero).
2. If a PRG and Z mode, or X mode, manager password
was defined type the [4-digit password] and press
.
3. Press
.
PLU Range Sales Report
This report provides the same transaction information as the
PLU Sales Report but pertaining to a defined range of PLUs.
1. Control lock key position: X only.
2. If an X mode manager password was defined, type the
[4-digit password] and press
.
3. Type the PLU number [0001 - 2000] that you want to start
from.
4. Press
.
5. Type the PLU number [0001 - 2000] that you want to
end with.
6. Press
.
Department Range Sales Report
This report provides the number of transactions performed
by the departments within the defined range, and their
related sales totals.
1. Control lock key position: X only.
2. If an X mode manager password was defined, type the
[4-digit password] and press
.
3. Type the department number [01-99] that you want to
start from.
4. Type the department number [01-99] that you want to end
with.
5. Press .
Department Group Sales Report
This report provides the same information as a Department
Range Sales Report, but for all the departments associated
with the defined department group.
1. Control lock key position: X only.
2. If an X mode manager password was defined, type the
[4-digit password] and press
.
3. Type the department group number
to .
To issue a report containing the sales of the departments
of all the department groups, type
.
4. Press
.
Time Report
The time report provides the net total sales performed by the
cash register on an hourly basis.
1. Control lock key position: X or Z (bear in mind that a Z time
report resets all time totals to zero).
2. If a PRG and Z mode, or X mode, manager password was
defined type the [4-digit password] and press
.
3. Type
and then press .
Training Report
This report provides an X or Z report of the transactions
performed in the training mode. Like the ordinary X and Z
financial reports, a Z report resets all transaction totals to
zero and provides the same information as an ordinary X or
Z financial report with the exception that the report identifier
is "X0" or "Z0".
1. Control lock key position: X or Z. Bear in mind that in the
Z position the training report contents are cleared.
2. If a training mode password was defined, type the
[4-digit password] and press
.
3. Press .
Electronic Journal Reports
An electronic journal report executed with the control
switch in the X position does not clear the electronic journal
memory (and therefore all transaction data are retained)
while the report executed with the control switch in the
Z position cancels electronic journal memory thus re-
storing it to its maximum13,000 line capacity pro-
grammed.
To momentarily interrupt report printing, press
. Press
this key again to resume printing (for example, to load paper
and avoid an out-of-paper condition).
To cancel report printing, press
.
PLU
number or
assigned
name
PLU 1
sales
counter
PLU 1
sales total
Total PLU
sales
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR6900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR6900 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR6900

Olivetti ECR6900 User Manual - German - 52 pages

Olivetti ECR6900 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info