40148
21
Zoom out
Zoom in
Previous page
1/50
Next page
13
ENGLISH
Example: Set Clerk 1 as a normal clerk, disabled for all
activities, and assigned a secret code 106.
Type/Press:
Entering a Clerk Number/Secret Code Before
Cash Register Operations
1. Control lock key position: REG or MGR.
2. Type a Clerk number
to and press
.
3. Type the corresponding three-digit code (if programmed)
and press . By default, the secret code is 000.
The clerk number is shown on the display (two digits far left)
to identify the clerk in operation and to indicate that transac-
tions can now be performed. The clerk number or pro-
grammed name is printed on the sales receipt and on
management reports.
Clerk Names
You can program a clerk name or identifier of up to 24
characters long by using the keypad or the Character Table.
It will be automatically printed on all receipts, journal records
and management reports.
1. Control lock key position: PRG.
2. Switch the cash register to the Clerk name definition
mode by pressing
repeatedly until the message
indicating the first Clerk number is displayed.
3. To define a specific clerk, type the clerk number
to
on the numeric keypad and then press .
4. Enter the letters or characters of the string you wish to
define and then press
. You are prompted to identify
the next clerk.
5. Repeat steps 3 and 4 for all the clerk names you want to
define.
6. Press
to exit.
Programming a Clerk Operational Status and
Secret Code
With the Clerk System active, you can assign a 7-digit
operational status code to each clerk that defines whether
certain activities are enabled or disabled. You must then also
define a 3-digit security code that the clerk will need to enter
to access cash register functions.
Listed below are the activities that you can enable or
disable for each clerk by using the related codes:
Void entries Refund entries
1 = Disabled 1 = Disabled
0 = Enabled 0 = Enabled
Negative % entries Paid Out entries
1 = Disabled 1 = Disabled
0 = Enabled 0 = Enabled
NOTE: Negative % entries and Paid Out entries must
always be set to the same value (both 0 or both 1).
Negative department Coupon entries
transactions &
PLU function
1 = Disabled 1 = Disabled
0 = Enabled 0 = Enabled
Training mode
0 = Normal clerk
1 = Training clerk
NOTE: By default, all the clerks are assigned the following
7-digit operational status code: 0000000. They are therefore
programmed as Normal clerks enabled to perform the opera-
tions indicated above.
If certain operations are disabled for a clerk, the same clerk
can, however, still perform these operations if they are
authorized to use Manager mode. In this case, the control
lock key must be switched to the MGR position so all the
activities indicated above, excluding Training Mode opera-
tion, can be performed.
With the Clerk System active:
1. Control lock key position: PRG.
2. Type the number
to corresponding to the
clerk you want to program and then press
.
3. Type the [VOID entries code], [Refund entries code],
[Negative % entries code], [Paid out entries code],
[Negative department transactions & PLU function
code], [Coupon entries code] and [Training mode
code] in this order and by referring to the previous table.
A 7-digit status code must be entered.
4. Press
.
5. Define a three-digit secret code by typing three
[numeric keys] and then press
.
Clerk number
7-digit status code
3-digit secret code
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR6900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR6900 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR6900

Olivetti ECR6900 User Manual - German - 52 pages

Olivetti ECR6900 User Manual - Dutch - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info