16654
13
Zoom out
Zoom in
Previous page
1/30
Next page
5
ENGLISH
5. Program a Fixed Price Look-Up (PLU)
Up to 220 PLUs can be programmed.
1. Control switch position: PRG
2. Press
, type the [PLU number (between 1 and
220)] and then press
.
3. Type the [unit price] that you wish to assign to the PLU.
4. Press the related department
to key to assign
the PLU to a Department from 1 to 14. If tax is required for
a particular PLU item, be sure to link the PLU number
related to the item to a department that is programmed for
tax. To program a department for tax, refer to the section
Link a Multiple/Single Item Sale, Tax Status and Item
Price to a Department.
5. Press
.
Example: Create PLU 1 with a unit price of £2.69
assigned to Department 3.
Type/Press:
After you have programmed your PLU items, you can print a
report that indicates the programmed values. See section
"PLU Programming Report" for details.
Cash Register Programming and
Features
Programs and transaction information for management re-
ports are stored in the memory of the cash register which is
protected by back-up batteries.
Before beginning to program the cash register or to
perform sales transactions, insert the batteries to save
this information if a power failure occurs or if you
unplug the cash register from the power outlet.
Making Changes to Cash Register
Programming
If you wish to make a change to your initial programming
(such as an update to VAT rates, PLUs or exchange rates):
Slide the control switch to the PRG position.
Re-do the program in question and confirm as explained
in the next sections
Slide the control switch to another operating mode.
A new program entry will automatically overwrite a previous
entry for the same program.
PLU number
PLU price
Department
Percent Discount (-%)
Setting this option automatically calculates the preset rate
each time the
key is pressed. The percentage rate can
be discounted from an individual item or from a sales trans-
action total.
1. Control switch position: PRG.
2. Type the [numbers] representing the desired percentage
rate. Up to four digits ranging from 0 to 99.99 can be used.
3. Press to store the rate.
Example: Program a standard 5.50% discount rate.
Type/Press:
PLU Status
The PLU status programming procedure should only be
performed if you are interested in the Open PLU Price (Sub-
department) option, recommended for items whose prices
change frequently.
The PLU status options are the following:
0 = Fixed PLU Price (the factory set default setting)
1 = Open PLU Price (Sub-department option)
1. Control switch position: PRG.
2. Press
to begin programming the PLU status.
3. Type the [PLU number 1 to 220], press , type the
[PLU Status number] and then press the related
department key. Use
for departments from 8 to 14.
4. Repeat step 3 for all desired PLU numbers.
5. Press key to finish programming the PLU status.
6. Program a Fixed Price Look Up as explained in "Quick
Start".
Example: Create PLU 6 with an open PLU price status to
Department 6.
Type/Press:
Units
Decimals
Start PLU status
programming
PLU number
selection
Status number
Department
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR5300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR5300 in the language / languages: English as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR5300

Olivetti ECR5300 User Manual - German - 30 pages

Olivetti ECR5300 User Manual - Dutch - 30 pages

Olivetti ECR5300 User Manual - Danish - 30 pages

Olivetti ECR5300 User Manual - French - 30 pages

Olivetti ECR5300 User Manual - Portuguese - 30 pages

Olivetti ECR5300 User Manual - Swedish - 30 pages

Olivetti ECR5300 User Manual - Spanish - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info