653708
40
Zoom out
Zoom in
Previous page
1/80
Next page
26
INDIVIDUAL CLERK
With the Clerk System active, you can assign an operational status to each clerk that defines whether the clerk can
perform certain types of transaction. You can then also define a 3-digit password that the clerk must enter to operate
the cash register.
Listed in the table below are the activities that you can enable or disable for each clerk.
Select
Programming Mode -> Configuration Setup -> individual Clerk.
Navigate to the field you want to personalize and enter its data (see “Data Entry Mode” for the keys to use). At the end,
you can press to return to the Main menu, to return to the previous menu or to skip to the next
form in sequence.
Manager Intervention During Clerk Transaction Entry
During transaction entry, if a clerk is not enabled to perform a certain type of operation (such as a VOID, REFUND and
so on), an authorized operator can intervene, pressing to enter Manager mode, and entering the Manager
password if one is programmed.
After performing the required operation, the operator can log off by pressing
again. At this point, the Clerk can
continue with the transaction and terminate it in the normal way.
ELECTRONIC JOURNAL
When you first switch on your cash register, or when backup batteries are not installed and you switch the cash register
off and on, you are prompted to choose the memory device on which you want to save the electronic journal (as
outlined in “Setting Your Language and PLU/EJ/TABLE Requirements”). You can also change this setup at a later time, if
desired, from
System Initialization in the Programming Mode menu (see “System Initialization”). Apart from this basic
initialization of the electronic journal, you can also configure a few additional parameters which are described below.
Select
Programming Mode -> Configuration Setup -> Electronic Journal. Navigate to the field you want to personalize
and enter its data (see “Data Entry Mode” for the keys to use).
At the end, press to return to the Main menu or to return to the previous menu.
Menu Item Possible Values
Description
Name (Alphanumeric) 24-digit clerk name that can be entered using the keypad or the Character
Table. It will be automatically printed on all receipts, journal records and
management reports.
Clerk Pwd (Numeric) 3-digit password that the clerk must enter to access cash register functions
(when Clerk System is active).
Clerk Mode NORMAL,
TRAINING
If the related Clerk login is only going to be used for Training activities,
select TRAINING. Default: NORMAL.
Void Enable YES, NO Void transactions allowed. YES - Enable, NO - Disable.
Refund Enable YES, NO Refunds allowed. YES - Enable, NO - Disable.
( %-) Enable YES, NO Percent discounts/add-ons allowed. YES - Enable, NO - Disable.
( -) Enable YES, NO Discounts/add-ons allowed. YES - Enable, NO - Disable.
PO Enable YES, NO Paid Out operations allowed. YES - Enable, NO - Disable.
Neg Dept
Enable
YES, NO Negative department transactions allowed. YES - Enable, NO - Disable.
EXTRA INV.
ENABLE
YES, NO Extra invoice operations allowed. YES - Enable, NO - Disable.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 8220 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 8220 S in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info