653708
39
Zoom out
Zoom in
Previous page
1/80
Next page
ENGLISH
25
REPORT PRINTING MODE
You can program what you want to see in reports and the fonts to be used. Select Programming Mode -> Configuration
Setup -> Report Printing Mode
. Navigate to the field you want to personalize and enter its data (see “Data Entry Mode”
for the keys to use). At the end, you can press to return to the Main menu or to return to the previous
menu.
CLERK SYSTEM
The Clerk System is a security feature that enables you to control access to the cash register and monitor the number of
transactions and sales of up to 15 Clerks. With the Clerk System activated you can create a password and an
operational status for each clerk, enabling or disabling the transactions they can perform (see "Individual Clerk"). By
default, all the clerks are programmed as Normal, enabled to perform special transactions such as Voids, Refunds,
Negative entries, Negative % entries, Paid Out and Negative Depts. If certain operations are disabled for a clerk the
same clerk can, however, still perform these operations if they are authorized to use Manager mode. In this case, they
can switch to Manager mode so all the activities indicated above, excluding Training Mode operation, can be
performed. Your cash register is configured at the factory with the Clerk System deactivated. When the Clerk System is
deactivated, the cash register can be used freely to register sales transactions.
Listed in the table below are the options for activating the clerk system.
Select
Programming Mode -> Configuration Setup -> Clerk System. Navigate to the field you want to personalize and
enter its data (see “Data Entry Mode” for the keys to use. At the end, you can press to return to the Main menu
or to return to the previous menu.
Menu Item Possible Values Description
X/Z Font NORMAL, COMP Font to be used for printing X and Z reports: NORMAL - normal,
COMP-compressed font in order to save paper.
EJ Font NORMAL, COMP Font to be used for printing EJ reports: NORMAL - normal,
COMP-compressed font.
PRG Font NORMAL, COMP Font to be used for printing in Programming mode: COMP -
compressed font.
Z1 Z2 Counter YES, NO Print Z1 and Z2 Counters. YES - Enable, NO - Disable.
GT YES, NO Print Grand Total. YES - Enable, NO - Disable.
Refund YES, NO Print Refund total. YES - Enable, NO - Disable.
Void YES, NO Print Void operations. YES - Enable, NO - Disable.
% in Dept & PLU YES, NO Print % ratio Dept/PLU. YES - Enable, NO - Disable.
Duplicate Z YES, NO Allow duplicate Z reports to be printed. YES - Enable, NO - Disable.
Zero Skip RPT YES, NO Activate zero skip for report. YES - Enable, NO - Disable.
Header on X/Z YES, NO Print a header on X/Z reports. YES - Enable, NO - Disable.
PLU Number YES, NO Print PLU number. YES - Enable, NO - Disable.
Menu Item Possible Values Description
Clerk System YES, NO Activate the Clerk System . YES - Enable, NO - Disable.
PWD Mandatory YES, NO Password entry is mandatory for all clerks. YES - Enable, NO - Disable.
Excl. Clerk Table YES, NO With table tracking in operation, transactions for a given table can only be
entered by a single, dedicated, clerk. The Manager nevertheless can
perform operations on any table. YES - Enable, NO - Disable.
Clerk Entry STAY, ONE TRN Password control for registering sales transactions:
ONE TRN - the Clerk has to log on before performing each transaction.
STAY - Once logged on, the Clerk remains logged on until is
pressed
Clerk Display YES, NO Display clerk Id on display. YES - Enable, NO - Disable.
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 8220 S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 8220 S in the language / languages: English as an attachment in your email.

The manual is 4,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info