452056
19
Zoom out
Zoom in
Previous page
1/59
Next page
11
ENGLISH
Make your selections by using the following options
(defaults in bold):
HDLO Print PO/RA Receipt Header
0 = No HDLO 0 = Enabled
1 = 0.01 - 0.09 1 = Disabled
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
1. Control lock key position: PRG.
2. Press
or to enter to the related key's
programming mode.
3. Type the required HDLO code
to with
reference to the table above.
4. Type the required PO/RA receipt header print status
or .
5. Press or again to exit this programming
mode.
Example: Assign an HDLO of a maximum 2 digits to
and decide not to print the receipt header.
Type/Press:
Discount or Add-on Amounts (+/-)
A High Digit Lock Out (HDLO) and a positive or negative
status can be assigned to the key. You can limit the
number of digits, i.e. the maximum value of a minus or plus
key operation, from 1 to 6 digits. This makes sure that
amounts do not exceed a maximum value. You can also
assign a discount (-) or add-on (+) status to this key so that
specific amounts are discounted or added on.
Make your selections for this feature from the following
options (defaults in bold):
HDLO Discount or Add-on
0 = No HDLO 0 = Discount
1 = 0.01 - 0.09 1 = Add-on
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
1. Control lock key position: PRG.
2. Type the required HDLO code [0 to 6] with reference to
the table above.
3. Type the required discount or add-on status
or
.
4. Press .
Example: Allocate a maximum of 5 digits and a discount
status to this key.
Type/Press:
Programming Payment Media
You can assign a name and a status to each of the media
types that can be used as tender for payment in customer
transactions.
The number identifying each media type is as follows:
Media Types
1 = Cash 4 = Credit card 1
2 = Check 5 = Credit card 2
3 = Charge card
Payment Media Status
The Cash, Check, Charge, Credit 1 and Credit 2 tender keys
can be programmed according to your business needs. The
programming of tender keys consists of assigning a 4-digit
code that characterizes the key as follows:
High Digit Lock Out (HDLO) status, whereby you prohibit
tenders of a certain number of digits and above.
Exact tender mandatory or not to end a sales transaction.
Calculate or not the change to be given to the customer.
Open or not the cash drawer when the tender key is
pressed.
NOTE: The Change Given option applies to all media types
apart from cash (Change Given is always enabled for cash).
A 4-digit tender key status can be programmed with the
following options (defaults in bold):
HDLO Exact Tender
0 = No HDLO 0 = Not required
1 = 0.01 - 0.09 1 = Required
2 = 0.01 - 0.99
3 = 0.01 - 9.99
4 = 0.01 - 99.99
5 = 0.01 - 999.99
6 = 0.01 - 9999.99
Change Given Drawer Open
0 = Enabled 0 = Enabled
1 = Disabled 1 = Disabled
1. Control lock key position: PRG.
2. Specify the 1-digit [Media Type] and press
.
3. Type the [HDLO code], [Tender status], [Change
status] and [Drawer status] codes by referring to the
previous table and then press
to exit.
Example: Program cheque tender as follows: no HDLO,
exact tender amount required to end the transaction, calculate
change on a tender and open drawer when the key is
pressed.
Type/Press:
4-digit status code
HDLO code
Discount status
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 6920F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 6920F in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Olivetti ECR 6920F

Olivetti ECR 6920F User Manual - Dutch - 59 pages

Olivetti ECR 6920F User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info