452059

Olivetti ECR 2450T Manual

30
Zoom out
Zoom in
Previous page
1/81
Next page
22
ENGLISH
Value Added Tax (VAT) Rates
Up to four VAT rates (VAT1, VAT2, VAT3 and VAT4) can be preset in
the cash register. A maximum 5-digit VAT rate can be programmed (0-
99.999%).
Setting a Fixed VAT Rate
Proceed as follows to program a fixed tax rate:
1. Turn the PRG key to the PRG position.
2. Type the [numbers] which represent the VAT (1 for VAT1, 2 for
VAT2, 3 for VAT3 and 4 for VAT4).
3. Press the [Tax Set] key. The message "TAX n RATE" appears on
the operator display where n is the number representing the VAT
rate.
4. Type the VAT rate. Up to five digits can be used, and you MUST
enter three digits after the desired decimal place. For example, to
enter a 5.5% VAT rate, type [5500]; to enter a 16% VAT rate, type
[16000].
5. Press the [Amt Tend/TOTAL] key. The tax rate entered followed
by its alphanumeric identifier (T1, T2, T3 or T4) is printed.
NOTE: If you make an error, press the [Clear] key and start again
from step 3.
6. Press the [Clear] key to program another feature, otherwise exit the
program mode by turning the PRG key to the OFF position.
Example: Set a VAT1 rate of 5.5%, VAT2 rate of 7%, VAT3 rate of
16% and a VAT4 rate of 20%.
Type/Press:
[1] + [Tax Set] + [5500] + [Amt Tend/TOTAL]
[2] + [Tax Set] + [7000] + [Amt Tend/TOTAL]
[3] + [Tax Set] + [16000] + [Amt Tend/TOTAL]
[4] + [Tax Set] + [20000] + [Amt Tend/TOTAL]
High Digit Lock Out (HDLO) and Tax Status
Assigned to the Minus Key (-)
You can limit the number of digits, i.e. the maximum value of a
minus key operation, from 1 to 6 digits. This makes sure that minus key
amounts do not exceed a maximum amount. You can also assign a VAT
rate or a non tax status to the minus key.
Make your selections for this feature from the following options:
High Digit Lock Out Taxation
0 = No HDLO 00 = Non taxable
1 = 1 digit (0.09) 01 = VAT1
2 = 2 digits (0.99) 02 = VAT2
3 = 3 digits (9.99) 03 = VAT3
4 = 4 digits (99.99) 04 = VAT4
5 = 5 digits (999.99)
6 = 6 digits (9999.99)
Programming the High Digit Lock Out and Tax Status
1. Turn the PRG key to the PRG position.
2. Type the HDLO code [0-6].
3. Type the tax status code [00-04].
4. Press the [-] key. A minus sign appears on the displays and the
caption "COUPON" is printed on the receipt along with the
programmed tax status.
5. Press the [Clear] key to program another feature, otherwise exit the
program mode by turning the PRG key to the OFF position.
Example: Allocate a maximum of 5 digits and VAT 2 to the minus key.
Type/Press:
[5] + [02] + [-]
… 30 …


Need help? Post your question in this forum.

Forumrules
1

Forum

olivetti-ecr-2450t

Reset search

  • How do I delete a over ring of £700 on a Olivetti register till?
    Submitted on 23-4-2022 at 18:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2450T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info