452059
14
Zoom out
Zoom in
Previous page
1/81
Next page
6
ENGLISH
21. [Subtotal w/Tax] - Displays the subtotal of a sale with sales tax.
22. [Euro] - When the cash register is in its default Local base cur-
rency, this key is used to program the Euro exchange rate and to
automatically calculate and display the value in Euro of the total
amount of a sale or of a particular amount registered. When the cash
register is programmed to work in the Euro base currency, pressing
this key converts the sales total to the Local currency.
23. [Amt Tend/TOTAL] (Amount Tendered/TOTAL) - Totals exact
cash transactions, computes change and totals check and charge
transactions.
The Control System
The Control Lock
The control lock is located on the upper left-hand side of the keypad.
The PRG REG or Z key must be properly inserted in the Control Lock
in order for you to be able to use the different cash register functions
available. The following figure shows the Control Lock and the
different modes which can be used.
Depending on the desired operation, insert the key in the Control
Lock and turn it to the following positions:
PRG Used to program the cash register according to your
specific needs.
OFF The cash register is turned off and cannot be used.
REG 1 The cash register can perform the standard sales transac-
tions. In this mode the preset or programmed header is
printed on both the customer receipt and printed journal.
REG 2 Same as the REG 1 mode with the only exception that the
preset or programmed header is not printed on the
customer receipt.
X Prints the X management report, Cash-in-Drawer report,
PLU report, clerk report, cash declaration and periodical
financial reports.
Z Prints the Z management report and resets totals (except
the grand total) to zero. Prints the PLU report, clerk
report, cash declaration and periodical financial reports.
Control Keys
The following sets of keys are provided as well as a set of keys to
open the cash drawer and printer compartment:
REG The REGISTER key can be used in the OFF, REG 1,
REG 2 and X modes, granting both Clerk and Supervisor
access to cash register functions.
PRG The PROGRAM key works in all modes (PRG, OFF,
REG 1, REG 2, X and Z). It is usually used by the
Supervisor to program the cash register and print X and Z
management reports.
Z The Z key can be used in the OFF, REG 1, REG 2, X and
Z modes granting a higher level access with respect to the
REG key.
14


Need help? Post your question in this forum.

Forumrules
1

Forum

olivetti-ecr-2450t

Reset search

  • How do I delete a over ring of £700 on a Olivetti register till?
    Submitted on 23-4-2022 at 18:01

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti ECR 2450T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti ECR 2450T in the language / languages: English as an attachment in your email.

The manual is 1,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info