Manual Olivetti d copia 2001 (page 40 of 82) (English)

436314

Zoom out

Zoom in

1/82

USING THE PRINTER MODE

The procedure for loading paper is the same as for loading copy paper. See "LOADING PAPER". (p.13)

BASIC PROCEDURE FOR PRINTING

The basic procedure for printing is explained below. To use convenient printer functions, see the "Online Manual" or

the printer driver help file.

Make sure that paper is loaded in the

tray.

The procedure for loading paper is the same as for

copying. See "LOADING PAPER" (p.13) and make

sure the paper that you wish to use is loaded.

Make sure that the ON LINE indicator

( ) on the operation panel is lit.

If the ON LINE indicator

( ) is not lit, press the

[ON LINE] key ( ).

When the indicator is not

lit, the machine is off-line

and cannot print. When

the indicator is blinking, a

print job is transferred to

the machine.

Open the file that you wish to print

and select "Print" from the File menu.

Make sure that the printer driver for

the machine is selected, and select

print settings in the printer driver.

For information on the settings in the printer

driver, see the "Online Manual", the "Software

Setup Guide", or the printer driver help file.

Click the "Print" button or the "OK"

button to begin printing.

The print job will be delivered to the paper output

tray.

Important points when setting the paper size

• If the dual function board is not installed, printing will

not take place correctly if the tray paper size setting

is A4R (8-1/2" x 11"R). To prevent incorrect printing,

set "Set Paper Size" to "A4-R" ("Letter-R") in the

printer driver. For more information, see

"CONFIGURING THE PRINTER DRIVER" in the

"Software Setup Guide".

Pausing a print job

To pause a print job during printing, press the [ON LINE] key ( ) on the operation panel to switch the machine

off-line. Printing will be paused and the ON LINE indicator ( ) will blink.

To cancel a print job, press the [CLEAR] key ( ) or the [CLEAR ALL] key ( ).

To resume printing, press the [ON LINE] key ( ) to switch the machine online.

When "Use close paper size" is disabled

The PAPER SIZE indicator on the operation panel will blink. You can press the [TRAY SELECT] key ( ) to select a

tray manually, or load paper in the bypass tray and press the [ON LINE] key ( ) to begin printing.

When "Use close paper size" is enabled

Printing will take place using a size of paper that is close to the size of the print image.

• Print jobs received while the machine is copying will be stored in memory. When the copy job is finished, the

print jobs will begin printing.

• Printing is not possible when the front or side cover is opened for machine maintenance, or when a misfeed

occurs or the machine runs out of paper or toner, or when the drum cartridge reaches its replacement time.

• If an original misfeed occurs in the SPF, printing will not be possible until the misfed original is removed and the

SPF is restored to a usable state.

Note

Make sure that the paper size setting on the

machine is the same as the paper size set in

the printer driver.

Note

• When the dual function board is installed, the print image is automatically rotated to fit the paper in the event that

the paper is loaded in an orientation different from the print image.

•

For limitations on copying in print mode and print mode limitations in copy mode, see "OPERATION IN COPY AND

PRINTER MODES". (p.37)

Note

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti d copia 2001 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Olivetti d copia 2001 Manual

Product: