436314
39
Zoom out
Zoom in
Previous page
1/82
Next page
35
4
Chapter 4
PRINTER FUNCTIONS
The machine includes a USB 1.1 connector and a parallel connector as standard equipment.
A computer can be connected to these connectors to use the machine as a printer.
When the dual function board is used, the following functions can be used in addition to the standard printer
functions.
High-speed data transfer (when connected to a USB 2.0 connector)
ROPM* function
Automatic rotation printing
To use the machine as a printer, the printer driver must first be installed as explained in the "Software Setup Guide".
* ROPM is an acronym for "Rip Once Print Many" processing. The ROPM function stores multiple pages of print data in memory
before printing. When printing multiple copies, this eliminates the need for the computer to repeatedly transmit the print data.
System requirements for USB 2.0 (Hi-Speed mode)
The following system is required to use USB 2.0 (Hi-Speed mode):
Your computer must be running Windows XP / Windows 2000 and the Microsoft USB 2.0 driver must be
pre-installed, or the USB 2.0 driver for Windows XP / Windows 2000 must be installed using Microsoft's
Windows Update service.
The "USB 2.0 mode switching" setting in the machine's user programs must be set to "Hi-Speed". To change
the setting, see "USB 2.0 mode switching" in the user programs. (p.42)
* Even when the Microsoft USB 2.0 driver is installed, some USB 2.0 expansion cards are not capable of
attaining the speed stipulated by the Hi-Speed standard. This problem can often be fixed by installing a more
recent driver for the card. To obtain the most recent driver for your card, contact the card's manufacturer.
If a problem occurs in printer mode, see "TROUBLESHOOTING". (p.48)
Two printer drivers are provided for the machine: a standard printer driver and a printer driver that is used when
the dual function board is installed. Install the correct printer driver depending on whether or not the dual
function board is installed. If the correct printer driver is not used, printing may not take place correctly. (See the
"Software Setup Guide" for information on installing the printer drivers.)
When using USB 2.0 (Hi-Speed mode), be sure to read "System requirements for USB 2.0 (Hi-Speed mode)"
(below) to verify that your system and the machine settings are configured appropriately.
Do not install the printer driver for the dual function board when the dual function board is not installed. If this is
done, a warning message will be printed out, and the print job will be cancelled.
When interrupt copying is being performed, printing is not possible.
Note
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olivetti d copia 2001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olivetti d copia 2001 in the language / languages: English as an attachment in your email.

The manual is 3,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info