688885
56
Zoom out
Zoom in
Previous page
1/144
Next page
GB
F
D
56
I
Air-conditioner with heat
pump (g. 16)
Fit the seal into the drain elbow,
then insert the drain joint into the
base pan hole of outdoor unit,
rotate 90 to securely assemble
them. Connecting the drain joint with
an extension drain hose (Locally
purchased), in case of the water
draining off the outdoor unit during
the heating mode.
A - seal
B - drain joint
C - base pan hole of outdoor unit
Installation of outside unit
After locating the ideal position for
installing the unit (as described in
chap. 2.4.1 and 2.4.2) proceed as
follows:
- Position the unit on the base, if
necessary using the antivibration
shims (g. 17).
1 air inlet
2 air outlet
- Screw any fastening nuts without
tightening them fully.
- Check the level of the unit with a
bubble level and shim if neces-
sary.
- Tighten the fastening nuts, if any.
* 9 - 10 - 12 K models
** 18 K models
*** 24 K models
Geräte mit Wärmepumpe
(Abb. 16)
Befestigen Sie die Dichtung im
Entwässerungswinkelstück,
setzen Sie anschließend die
Entwässerungskupplung in die
Öffnung der Sockelplatte und drehen
Sie um 90°, um die Teile korrekt
zusammenzubauen. Verbinden
Sie die Entwässerungskupplung
mit einer (vor Ort gekauften)
Entwässerungsrohr-Verlängerung,
falls während des Betriebs im
Heizungs-Modus Wasser aus der
Außeneinheit treten sollte.
A - Dichtung
B - Wasserablaufkupplung
C - Öffnung des Sockelbehälters
der Außeneinheit
Montage der Außeneinheit
Nach der Positionierung der Einheit
an der vorgesehenen Stelle (siehe
Abschnitt 2.4.1 und 2.4.2) ist wie
folgt vorzugehen:
- Die Einheit auf dem Gestell
positionieren und, falls erforderlich,
die schwingungsdämpfenden
Gummipuffer anbringen (Abb. 17).
1 Lufteinlass
2 Luftauslass
- Eventuelle Befestigungsmuttern
(nicht zu fest) anziehen.
- Die Einheit unter Zuhilfenahme
einer Wasserwaage
nivellieren. Eventuell können
Unterlegscheiben verwendet
werden.
- Eventuelle Befestigungsmuttern
fest anziehen.
* 9 - 10 - 12 K Modelle
** 18 K Modelle
*** 24 K Modelle
2
Apparecchi a pompa di calore
(g. 16)
Fissare la guarnizione nel gomito
di drenaggio, quindi inserire il
giunto di drenaggio nel foro del
piatto della base, ruotare di 90°
per assemblarli in modo corretto.
Collegare il giunto di drenaggio con
una prolunga di tubo di drenaggio
(acquistato in loco), nel caso vi sia
una fuoriuscita di acqua dall’unità
esterna durante il funzionamento
in modalità riscaldamento.
A - guarnizione
B - giunto di drenaggio
C - foro del piatto della base
dell’unità esterna
Montaggio unità esterna
Dopo aver individuato la posizione
ideale per il piazzamento
dell’unità (come descritto nei par.
2.4.1 e 2.4.2) procedere come
indicato:
- Posizionare l’unità sul basamento
in appoggio, se necessario, su
gommini antivibranti (g. 17).
1 ingresso aria
2 uscita aria
- Avvitare, senza serrare
completamente, gli eventuali
dadi di ssaggio.
- Vericare il livello dell’unità con
una bolla, e, nel caso spessorare.
- Avvitare definitivamente gli
eventuali dadi di ssaggio.
* modello 9 - 10 - 12 K
** modello 18 K
*** modello 24 K
Appareils à pompe à chaleur
(g. 16)
Fixer le joint dans le coude de
drainage, puis insérer le joint de
drainage dans l’orice du plateau
de la base, tourner de 90° pour
les assembler de façon correcte.
Raccorder le joint de drainage au
moyen d’une rallonge de tube de
drainage (achetée sur place), s’il
y a une fuite d’eau hors de l’unité
externe pendant le fonctionnement
en mode chauffage.
A - joint
B - joint de drainage
C - orice du plateau de la base de
l’unité externe
Montage unité extérieure
Après avoir repéré la position
idéale pour l’emplacement de
l’unité (comme décrit aux chap.
2.4.1 et 2.4.2) procéder de la façon
suivante:
- Positionner l’unité sur le châssis
en appui, si nécessaire, sur
des tampons en caoutchouc
antivibration (g. 17).
1 entrée air
2 sortie air
- Visser, sans serrer complètement,
les éventuels écrous de blocage.
- Vérier le niveau de l’unité avec
un niveau à bulle, et, si c’est le
cas, mettre une cale.
- Visser à fond les éventuels écrous
de blocage.
* modèles 9 - 10 - 12 K
** modèles 18 K
*** modèles 24 K
16
2.4.4
2.4.3
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid NEXYA S4 INVERTER 24 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid NEXYA S4 INVERTER 24 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 7,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info