688901
42
Zoom out
Zoom in
Previous page
1/52
Next page
GB
F
D
42
I
2. Mount the back plate of the
remote control
a. For exposed mounting, fasten the
back plate to the wall with 3 screws
(M4×20) and anchors.
b. For ush mounting, fasten the back
plate to the switch box with 2 screws
(M4×25), and fasten the back plate
to the wall with 1 screw (M4×20).
NOTE: Place the unit on a at
surface. Be careful not to distort
the back plate of the remote
control by over tightening the
screws.
Piastra posteriore - Back plate
Plaque arrière - Rückplatte
Viti (M4×20) - Screws (M4×20)
Vis (M4×20) - Schrauben (M4×20)
Scatola di commutazione - Switch box
Boîte de commutation - Schaltkasten
2. Montare la piastra posteriore del
telecomando
a. Per l'installazione a vista, ssare
la piastra posteriore alla parete con
3 viti (M4×20) e tasselli.
b. Per il montaggio a incasso, ssare
la piastra poste-riore alla scatola di
commutazione con 2 viti (M4×25),
e ssare la piastra posteriore alla
parete con 1 vite (M4×20).
NOTA: collocare l'unità su una
supercie piana. Fare attenzione
a non deformare la piastra poste-
riore del telecomando stringendo
eccessivamen-te le viti.
2. Monter la plaque arrière de la
télécommande
a. Pour l'installation apparente, xer
la plaque arrière au mur avec 3 vis
(M4×20) et des chevilles.
b. Pour le montage encastré, xer
la plaque arrière à la boîte de
commutation avec 2 vis (M4×25), et
xer la plaque arrière au mur avec
1 vis (M4×20).
NOTE : placer l'unité sur une
surface plane. Veiller à ne pas
déformer la plaque arrière de
la télécommande en serrant
excessivement les vis.
2. Montieren Sie die Rückplatte der
Fernbedienung
a. Zur sichtbaren Installation
befestigen Sie die Rückplatte mit
3 Schrauben (M4×20) und Dübeln
an der Wand.
b. Für einen versenkten Einbau
befestigen Sie die Rückplatte mit
2 Schrauben (M4×25), an dem
Schaltkasten und die Rückplatte an
der Wand mit 1 Schraube (M4×20).
HINWEIS: Positionieren Sie die
Einheit auf einer ebenen Fläche.
Achten Sie darauf die Rückplatte
der Fernbedienung nicht durch zu
starkes Festziehen der Schrauben
zu verbiegen.
Viti (M4×20) - Screws (M4×20)
Vis (M4×20) - Schrauben (M4×20)
Piastra posteriore - Back plate
Plaque arrière - Rückplatte
Viti (M4×25) - Screws (M4×25)
Vis (M4×25) - Schrauben (M4×25)
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid NEXYA S4 E DUCT 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid NEXYA S4 E DUCT 9 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info