703016

Olimpia Splendid MIA 2 9 Manual

19
Zoom out
Zoom in
Previous page
1/60
Next page
19
GB
3.0 Turning on the stove
3.1 Suggestions
Do not continuously turn the stove on and off as this could provoke sparks that could
shorten the life of the electrical components.
t Do not touch the stove with wet hands: the stove has electrical components that could
produce sparks if handled incorrectly. Only authorized technicians can resolve possible
problems.
t%POPUSFNPWFBny screws from the fire chamber without first lubricating them well.
t/FWFSPQFOUIFHMBTTEPPSPGUIFQFMMFUTUPWFXIJMFUIFTUPWFJTJOPQFSation.
t#FTVSFUIat the brazier basket is positioned correctly.
t The flue system must be suitable for inspecion. If it cannot be removed, it must have
some holes for inspection and cleaning.
3.2 How to load pellets in the tank
You can load pellets in the tank through the door on the upper part of the stove.
Join the following procedure to load pellets:
t0QFOUIFEPPSPOUIFVQQFSQBSUPGUIFTUPWF
t Load the wished pellets quantity with caution (load enough pellets to grant a sufficient
GVODUJPOJOHPGUIFTUPWF
t$MPTFUIFEPPr.
3.3 Lighting
2.1 Stove setting
How to change the wished room temperature
Join the following procedure to change the wished temperature:
Press the key (1) once to enter the menu and set temperature.
You will read the word “Set” and the wished temperature on the display.
Use the keys (2) e (3) to increase or reduce the wished value.
The stove will leave the menu Set temperature automatically as soon as you do not work
on it for some seconds.
How to change the working power
Join the following procedure to change the working power:
Press the key (1) once to enter the menu and set the working power. You will read
the word “Pot” and the range of 5 possible powers on the display.
Use the keys (2) and (3) to increase or reduce the wished value.
The stove will leave the menu Set working power automatically as soon as you do not
use it for some seconds.
F
a
switch loca
The upper display will read
Press the button for 2 seconds. After a few moments the smoke extractor and
the lighting resistor will start and the display will read “
the led resistence
is switched on.
After 1 minute the display will read ”, the stove will load the pellets and
Once the appropriate temperature has been reached the display will read “ ”:
this means that the stove has begun the last phase in lighting, at the end of which the
stove will be completely opera
switched off.
After several minutes of ventilation the display will read “O/ 1-2-3-4-5” and the room
temperature, according to the power tha
Once the programmed temperature is reached the display will read i&$0” and the
room tempera
The temperature led lights when the programmed tempera
FIRE STAB.
LOAD PELL.
“
ACC.
2.2 Remote control functions
Certain stove adjustment and check functions
are accessible solely via the multifunction remote
control.
TURBO function.
Press the TURBO key on the remote control to
enable the function. The display does not signal
the enabling of this function when the stove is off.
During the heating phase the stove goes to
maximum and the temperature set point goes to
30° for 30 minutes. At the end of the preset time
the stove resumes running at the set power and
temperature set point. During the heating phase
the stove signals this function by displaying “Turb”
alternated with other displays.
SLEEP function.
Press the SLEEP key on the remote control to
enable the function. The display does not signal
the enabling of this function when the stove is off.
After 60 minutes of heating, this function reduces
the temperature setting by 1°C to enable the stove
to use less energy. During the heating phase the
stove signals this function by displaying “Slee”
alternated with other displays.
AUTO function.
Press the AUTO key on the remote control to
enable the function. The display does not signal
the enabling of this function when the stove
is off.
During the heating phase, the stove regulates the
heating power proportionally as the temperature
set point gets closer. During the heating phase
the stove signals this function by displaying “Auto”
alternated with other displays.
ECO function.
Press the ECO key on the remote control to
enable the function. The display does not signal
the enabling of this function when the stove is off.
During the heating phase the stove lowers the
heating power every 10 minutes until the minimum
is reached. During the heating phase the stove
signals this function by displaying “Eco” alternated
with other displays.
ATTENZIONE:
the furnace and ash drawer must be cleaned every day and prior to
each powering-on. Cleaning must consist in the complete removal
of all residue.
Failure to clean or incorrect cleaning may cause danger and harm.
Do not re-use the pellet possibly remained in the brazier due to no
starting-up.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid MIA 2 9 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid MIA 2 9 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info