588285
36
Zoom out
Zoom in
Previous page
1/144
Next page
GB
F
D
36
I
Indoor unit installation (fig. 7)
1 Pass the piping through the hole
in the wall.
2 Put the upper claw at the back of
the indoor unit on the upper hook
of the installation plate, move the
indoor unit from side to side to
see that it is securely hooked.
3 Piping can easily be made by lifting
the indoor unit with a cushioning
material between the indoor unit
and the wall. Get it out after finish
piping.
4 Push the lower part of the indoor
unit up on the wall, Then move
the indoor unit from side to side,
up and down to check if it is
hooked securely.
2
2.3.5 Installation unité interne (fig. 7)
1 Passer les tubes à travers le trou
percé dans le mur.
2 Mettre l'étrier supérieur du côté
arrière de l'unité interne sur le
crochet supérieur de la plaque
d'installation. Déplacer l'unité
interne latéralement pour s'assurer
qu'elle est accrochée de façon
sûre.
3 Le raccordement des tubes peut
facilement être effectué en
soulevant l'unité interne avec un
matériau de rembourrage entre
l'unité interne et le mur. L'enlever
une fois les raccordements
terminés.
4 Pousser la partie inférieure de
l'unité interne sur le mur. Déplacer
ensuite l'unité interne latéralement
et verticalement pour s'assurer
qu'elle est accrochée de façon
sûre.
Installazione unità interna (fig. 7)
1 Passare i tubi attraverso il foro
nella parete.
2 Mettere la staffa superiore della
parte posteriore dell'unità interna
sul gancio superiore della piastra
di installazione. Muovere l'unità
interna lateralmente per verificare
che sia agganciata in modo sicuro.
3 La connessione dei tubi può
facilmente essere fatta sollevando
l'unità interna con del materiale di
imbottitura tra l'unità interna e la
parete. Toglierla, una volta
terminati gli allacciamenti.
4 Spingere la parte inferiore dell'unità
interna sulla parete. Muovere
quindi l'unità interna lateralmente
e verticalmente per verificare che
sia agganciata in modo sicuro.
Installation der Inneneinheit (Abb. 7)
1 Führen Sie die Schläuche durch
die Öffnung in der Wand
2. Fügen Sie den oberen Bügel des
hinteren Teils der Inneneinheit auf
den oberen Haken der
Installationsplatte. Bewegen Sie
die Inneneinheit seitlich um
sicherzustellen, dass diese auf
sichere Art eingehängt ist.
3 Der Anschluss der Schläuche
kann einfach erfolgen, indem die
Inneneinheit mit Futtermaterial
zwischen Inneneinheit und Wand
angehoben wird. Entfernen Sie
diese nach Herstellung der
Anschlüsse.
4 Schieben Sie den unteren Teil der
Inneneinheit an die Wand Bewegen
Sie die Inneneinheit seitlich und
vertikal um sicherzustellen, dass
diese auf sichere Art eingehängt
ist.
Downloaded from AC-Manual.com Manuals
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Olimpia Splendid Big inverter DC 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Olimpia Splendid Big inverter DC 18 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info