665285
22
Zoom out
Zoom in
Previous page
1/128
Next page
- 22 -
Preparing Your Printer
1
1. Setup
Turning Off the Power
1
Hold down the power switch (1) for
about a second.
The message “Shutting down Please wait.
Printer will turn off automatically” appears
in the operator panel, and the power switch
indicator blinks every 1 second. Then the printer
turns off automatically and the power switch
indicator goes out.
Note
It may take about 5 minutes to turn off the power.
Wait until it turns off.
Holding down the power switch for more than 5
seconds turns off printer forcibly. Only perform
this procedure when a problem occurs. For printer
problems, refer to “Other Issues” P.82.
1
When the Printer is Not Used for a
Long Time
When the printer is not used for a long time due
to consecutive holidays or when on vacation, or
when changing or attaching parts in repair or
maintenance, unplug the AC cord.
Memo
The printer will not be functionally impaired even if left
unplugged for a long time (more than 4 weeks).
Power Save Mode and Deep Sleep Mode
Two-phase power conservation enables you to
save on power consumed by the printer.
Power Save Mode
When your printer is not used for a certain
period of time, it automatically enters the power
save mode to reduce the power consumption.
You can enter the power save mode manually
by pressing the <POWER SAVE> button on the
operator panel.
The <POWER SAVE> button lights up green
while in this mode.
Memo
By factory default, the time interval before entering the
power save mode is set to 1 minute. For how to change
the time that elapses before the printer enters the power
save mode, refer to “Setting the Time that Elapses Before
Entering the Power Save Mode” P.58.
Deep Sleep Mode
Your printer goes from the power save mode to
the deep sleep mode after a set period of time.
The <POWER SAVE> button blinks while in the
deep sleep mode.
Note
The printer does not enter the deep sleep mode if an error
occurs.
Memo
By factory default, the time interval before entering the
deep sleep mode is set to 15 minutes. For how to change
the time that elapses before the printer enters the deep
sleep mode, refer to “Setting the Time that Elapses Before
Entering the Deep Sleep Mode” P.59.
Reference
For more detailed information on deep sleep mode, please
refer to the User’s Manual (Advanced).
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki Pro8432 WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki Pro8432 WT in the language / languages: English as an attachment in your email.

The manual is 41,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki Pro8432 WT

Oki Pro8432 WT Additional guide - English - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info