665285
21
Zoom out
Zoom in
Previous page
1/128
Next page
- 21 -
Preparing Your Printer
1
1. Setup
Turning On/Off the Power
Power Supply Conditions
The power supply must meet the following
conditions:
Voltage: 110 - 127 VAC (Range 99 - 140 VAC)
220 - 240 VAC (Range 198 - 264 VAC)
Frequency: 50/60 Hz ± 2%
Note
If the power supply is unstable, use a voltage regulator.
The maximum power consumption of this printer is
1400 W. Ensure that the power supply is sufcient to
operate this printer.
We do not guarantee operation where an uninterruptible
power system (UPS) or inverter is used. Do not use an
uninterruptible power system (UPS) or inverter.
WARNIN
There is a risk of getting
an electric shock and/or
causing re.
Be sure to turn off the power supply switch when
attaching or removing the AC cable and earth wire.
Be sure to connect an earth wire to the grounding
terminal of exclusive use.
Please do not connect with the ground of a water pipe,
a gas pipe, and a telephone wire, and a lightning rod by
any means.
Make sure to connect with the ground terminal before
connecting the power cord to the power supply plug.
Be sure to plug in and unplug the AC cable while holding
on to the power supply plug.
Insert the AC cable plug completely into the wall socket
securely.
Do not touch the power cord, or printer, if your hands
are wet.
Install a power cord in the place which is not stepped
on, and do not place a thing on a power cord.
Do not use the cord tied in a bundle.
Please do not use the damaged power cord.
Do not use multi-outlet adapters.
Do not connect this printer and other electric products
to the same wall socket. If it connects simultaneously
with an air conditioner, copier, shredder, etc. Especially,
a printer may incorrect-operate by the electric
noise. When you connect with the same wall socket
unavoidably, please use a commercial noise lter or a
commercial noise cut transformer.
Use the attached power cord and insert it directory with
the ground terminal. Do not use the power cord for
other product for the printer.
Do not use an extension cord. When you use it
unavoidably, use the thing more than rated 15 A.
Use of an extended code may not operate a printer
normally by AC voltage descent.
During printing, do not shut off a power supply or do not
pull out a power supply plug.
When you use it neither for consecutive holidays nor a
travel for a long time, pull out a power cord.
Do not use attached power cord to the other products.
Turning On the Power
1
Plug the AC cord (1) into the AC power
socket of your printer.
1
2 Plug the AC cord into the electric socket.
3 Hold down the power switch (2) for
about 1 second to turn on the power.
2
The Power switch LED indicator lights up when
the printer turns on.
The message “Ready To Print” is displayed in
the operator panel once printer is ready.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki Pro8432 WT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki Pro8432 WT in the language / languages: English as an attachment in your email.

The manual is 41,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki Pro8432 WT

Oki Pro8432 WT Additional guide - English - 79 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info