424254

Oki of 5680 Manual

54
Zoom out
Zoom in
Previous page
1/124
Next page
48
6. Using the numeric keypad, enter the 4-digit password for the
mailbox you want to print from.
7. Press the
YES key. The message begins printing.
Note: If you want to clear the mailbox without waiting for
printing, press the
Stop key at this point. The display
changes to
CANCEL? Press the YES key to clear the
mailbox.
Relay Broadcasting
Relay broadcasting is where one fax machine, which is the relay
initiating station, sends a document to another fax machine. The
receiving fax machine, which is the relay key station, then re-
sends (broadcasts) the document to a number of other locations.
Relay Initiating Station
Your fax machine can act as the relay initiating station, which
starts the relay broadcast by sending the original documents.
Before programming your fax machine to initiate a relay broad-
cast, you will need to obtain the following information from the
operator of the fax machine you intend to use as a relay key sta-
tion:
Note: The designated recipient of the receipt report sent by the
relay station (function in which the relay station sends a
report on transmission results to the destination specified
by the relay initiating station) shall be the destination
programmed into Auto-Dial number 150.
Relay Password: This is the relay password (up to 20
digits) which is programmed into the relay key station.
Remote List Number: These numbers (up to 20 digits) are
the code numbers of locations or groups of locations
programmed into the relay key station.
Relay Key Station
The relay key station is the fax machine that receives the origi-
nal fax message, and then automatically relay broadcasts the
message to other remote fax machines. For this feature to be
available, the fax machine operating as a relay key station must
be able to receive and relay broadcast the message to other fax
machines (OKIFAX 2600, 5750, 5950, 5980, or fax of another
maker with a SUB PWD relay function).
Initiating Relay Broadcasts
1. Load your document.
2. Press the
Select Function key.
3. Press the
4/Relay Initiate TX One-Touch key. The display
shows
RELAY PASSWORD.
4. Using the numeric keypad, enter the password from the hub
relay station (up to 20 digits).
5. Press the
Start key. The display shows REMOTE LIST NO.
6. Using the numeric keypad, enter the remote list number.
SELECT
FUNCTION
RELAY
INIT. TX
4/EF
4: RELAY PASSWORD
… 54 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki of 5680 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki of 5680 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info