423827
51
Zoom out
Zoom in
Previous page
1/104
Next page
Basic Operations 43
English
4. If necessary, use the Transmit Resolution/YES key to set the
resolution of your document.
5. If necessary, use the Type of Original/NO key to set the level of
contrast in your document.
6. Your documents are now ready for faxing or copying.
Sending faxes to single location
1. Load your documents.
2. Select a location. Refer to the instructions below.
3. If necessary, press the Start key to begin the transmission. Refer to
the table below to understand some of the messages you may see
during a typical fax transmission.
Document Type Resolution
Normal office documents STD (Standard)
Documents with small type or other fine details FINE or EX. FINE
Documents with photos or many shades of gray PHOTO
Document Type Contrast
Documents with normal contrast NORMAL
Documents which are too light LIGHT
Documents which are too dark DARK
To Dial Using Do This
One Touch key Press the One Touch key. Lift the main One Touch keypad to
access one Touch keys 16–30.
Auto Dial number Press the Auto Dial key, then enter the two digit Auto Dial
number on the numeric keypad.
Numeric keypad Dial as you would on a normal telephone. If you make a mistake,
press the YES key to go back and re-enter the number.
External telephone Pick up the handset of your external telephone and dial the
number of the machine you wish to transmit to. If the receiving
fax machine is in automatic reception mode, you will hear a high
pitched tone. If a person answers the phone, ask them to press the
Start key on their fax machine.
Message Explanation
(location) The Personal ID or TSI/CSI of the remote location. If this is not
prgrammed in the remote location, the Location ID or telephone
number you entered will identify the location during transmission.
DIALLING Your fax machine is dialling the number.
CALLING The line is ringing.
SENDING Your fax machine is sending the message.
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki of 5400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki of 5400 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info