563101
62
Zoom out
Zoom in
Previous page
1/81
Next page
Troubleshooting > 62
10. Set the Power Switch to ON.
R
ESPONDING
TO
ALARM
CONDITIONS
Use the following table for guidance on how to respond to indicated alarm conditions.
R
ESPONDING
TO
GENERAL
PROBLEMS
Use the following table to help you to identify symptoms with possible causes and take
suggested remedial actions.
NOTE
Use the above procedure to clear paper jam when using continuous form-
front push.
INDICATOR ALARM MEANINGS AND ACTIONS
SEL ALARM
OFF ON Paper has run out. Add paper and press the SEL button.
OFF Flashing The Paper Type lever is wrongly set for the type of paper in
use. Press the SEL button and set the Paper Type lever to the
correct position.
OFF Flashing Problem with cut sheet feeding. Remove the cut sheet.
Flashing ON Print data is received but printing does not start because no
paper is being fed. Insert paper.
Flashing Flashing Printing cannot be resumed at this stage. Turn the power OFF,
verify that the carriage moves properly, then turn the power
ON again.
If the problem is still there after you turn the power ON again,
contact your dealer.
PROBLEM CAUSE ACTION
No power
No power The power cable is not
properly connected.
Check the power cable is
properly connected at both
power outlet and printer.
Power outlet problem or
power outage.
Plug another appliance into
this outlet to check if it
works.
No printing takes place
SEL indicator is unlit. The printer driver is not
installed properly.
Re-install the printer driver
correctly.
The printer has just stopped
printing.
Press the SEL button.
There is no paper in the
printer.
Load paper.
SEL indicator is illuminated
but no printing takes place.
Interface cable is
disconnected.
Reconnect the interface
cable.
Wrong interface cable has
been used.
Use correct interface cable.
The print head is moving but
no printing takes place.
The ribbon cartridge has not
been installed.
Install the ribbon cartridge.
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5721 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5721 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info