665231
143
Zoom out
Zoom in
Previous page
1/150
Next page
- 143 -
6
6. Troubleshooting
6. Troubleshooting
This chapter explains initializing, deleting and updating drivers.
Initializing
This section explains how to initialize an SD memory card and ash memory and how to reset the
equipment settings to their defaults.
You can delete data or settings stored on the printer to restore the settings to how they were at the
time of purchase.
Note
In the default settings, [Initialize] cannot be selected because [No] is selected for [Enable Initialization] of
[Storage Setup] in [Boot Menu]. Set [Enable Initialization] of [Storage Setup] in [Boot Menu] to [Yes].
Memo
In order to access the [Admin Setup] menu, an administrator password is required. The default password is “aaaaaa”.
Initializing an SD memory
card
Carry out initialization of an SD card when
inserting a card that has been used in other
equipment or when the SD Card is not properly
recognized.
An SD memory card is used as storage for
spooling when making multiple copies, for saving
secure print/ encrypted print data, and for form
data and macros. Initialization deletes stored
data.
An SD memory card has three partitions. They
are PS, Common, and PCL. When an SD memory
card is initialized, each partition is respectively
divided into the percentage specied (in the
factory default setting, PS: 30%, Common:
50%, PCL: 20%). You can also format particular
partitions individually.
If an SD memory card that has been installed to
another device is installed to the printer, or if the
SD memory card installed to the printer cannot
be detected anymore, [Initialize Yes/No] may
appear on the display when the printer is turned
on. In such a case, select [Yes]. (Data stored in
the SD memory card is deleted.)
If [No] is selected and [Service call 067:Error]
appears on the display, turn off the printer and
detach the SD memory card, or turn off the
printer and turn it back on with the SD memory
card left installed, then select [Yes].
Formatting the Entire Area
You can format the entire area of the SD
memory card installed in the printer.
Note
When you initialize the entire area of an SD memory card,
the following data is deleted.
- Stored job data subject for [Secure Print],
[Encrypted Secure Print] or [Store to SD Card].
- Custom demo data
- Form data
1 Press the <ENTER> button
2 Press to select [Admin Setup] and
then press the <ENTER> button.
3 Enter the administrator password using
the ten-key pad.
The default password is “aaaaaa”.
4 Press the <ENTER> button.
5 Press to select [SD Card Setup] and
then press the <ENTER> button.
6 Make sure that [Initialize] is selected
and then press the <ENTER> button.
7 Make sure that [Execute] is selected
and then press the <ENTER> button.
A message appears notifying you that continuing
will automatically restart the system. Select
[Yes] to continue.
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES8441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES8441 in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES8441

Oki ES8441 User Manual - German - 167 pages

Oki ES8441 User Manual - Dutch - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info