665231
142
Zoom out
Zoom in
Previous page
1/150
Next page
- 142 -
Other Operations
5
5. Network Settings
8 Click [Start] and select
[Administrative Tools]>[DHCP] to
launch the [DHCP] wizard.
9 On the DHCP list, select a server to use.
10 From the [Action] menu, select [New
Scope].
11 On the [New Scope Wizard], follow the
on-screen instructions and congure the
settings as necessary.
Memo
Be sure to congure the default gateway settings.
On the [Activate Scope] screen, select [Yes, I
want to activate the scope now].
12 Click [Finish].
13 Select the new scope from the DHCP list
and then select [Reservations].
14 From the [Action] menu, select [New
Reservation].
15 Congure the settings.
16 Click [Add].
17 Click [Close].
18 From the [File] menu, select [Exit].
Conguring Your Printer
The following explains how to congure your
printer to use DHCP/BOOTP.
Note that since the DHCP/BOOTP protocol is
enabled by factory default, you do not have to
perform this procedure.
Memo
The following steps are explained using Network Card
Setup as an example. The steps and menus may differ
depending on the software you use.
1 Turn on the printer.
2 Turn on your computer and insert the
software DVD-ROM.
3 Click [Run Setup.exe].
If the [User Account Control] dialog box
appears, click [Yes].
4 Read the language, and then click
[Next].
5 Select a model and then click [Next].
6 Read the license agreement and click
[I Agree].
7 Read the [Environmental advice for
Users] and then click [Next].
8 Select [Device Conguration]>
[Network Card Setup Utility].
9 Select your printer from the list.
10 From the [Setting] menu, select
[Setting Printer].
11 Enter the IP address and then click
[OK].
12 Enter the password at [Enter
Password] and then click [OK].
- The factory default password is the last six
digits of the MAC address.
- The password is case-sensitive.
13 Click [OK] on the conrmation window.
The printer restarts to enable the new settings.
The printer status icon changes to red during the
restart. The status icon changes to green when
the printer has restarted and the new settings
have been enabled.
14 From the [File] menu, select [Exit] to
close the Network Card Setup.
142


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES8441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES8441 in the language / languages: English as an attachment in your email.

The manual is 7,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES8441

Oki ES8441 User Manual - German - 167 pages

Oki ES8441 User Manual - Dutch - 164 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info