492991
160
Zoom out
Zoom in
Previous page
1/203
Next page
Other Issues
-160-
The Copied Output is Different from the Original Document
Troubles after Starting to Copy
Unable to copy. Is the Continuous Scan mode on? Select [Scan completed] on the
display screen.
P. 8 2
Is the machine off line? Press the <PRINT> key on the
operator panel, and then select
[On-Line/Off-Line].
-
Do you have access to make
copies?
Enter your authorized PIN or user
name and password.
P.128
Unable to copy mixed
size documents.
Is [Mixed Size] set to [OFF]? Set [Mixed Size] to [ON]. Advanced
Is the size of your document
compatible for making mixed size
copies?
Use documents sizes supported for
mixed size copying.
Advanced
Is paper of all the sizes of your
original loaded?
Load paper of the required sizes on
each paper tray. The paper trays
need to be set to [ON] or [ON
(Prior)] from the <SETTING>
key > [Paper Setup] > [Select
Tray] > [Copy].
-
Unable to sort copies. Is [Sort] set to [OFF]? Set [Sort] to [ON]. Advanced
Symptom Point to check Remedy Reference
The copied output is
different from the
original document.
Is [DuplexCopy] enabled? Set [DuplexCopy] to [OFF]. P. 8 3
Is [Mixed Size] set to [ON]? Set [Mixed Size] to [OFF]. Advanced
The size of the copied
output is different from
the size of the original
document.
Is the proper size paper for the
document loaded on the paper
tray?
Load the proper size paper for the
document.
P. 3 2
Is the zoom ratio properly set? Set the proper zoom ratio. P. 8 1
Is [Repeat] set to [ON]? Set [Repeat] to [OFF]. Advanced
A part of the document
image is missing on the
copied output.
Is [Edge Erase] set to [ON]? Set [Edge Erase] to [OFF]. Advanced
Is [Margin] set to [ON]? Set [Margin] to [OFF]. Advanced
Is [N-in-1] set to [ON]? Set [N-in-1] to [OFF]. Advanced
Symptom Point to check Remedy Reference
The machine is slow to
start copying.
Is [Warming Up] or [Preparing]
displayed on the display screen?
The machine is preparing.
Wait until it starts copying.
-
A copy job is cancelled. Is any error occurring? A copy job is cancelled when
specific errors occur while copying.
Clear the error and start the copy
job again.
P.141
Is there paper in the MP tray? When copying using paper from
the MP tray, check if enough paper
is loaded in the MP tray before
starting to copy. And, press the
<SETTING> key and select
[Paper Setup] > [Select Tray] >
[Copy] > [MP tray], and then
check that [ON] or [ON (Prior)] is
selected.
-
Symptom Point to check Remedy Reference
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4191 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4191

Oki ES4191 User Manual - English - 182 pages

Oki ES4191 User Manual - German - 229 pages

Oki ES4191 User Manual - German - 210 pages

Oki ES4191 User Manual - Dutch - 222 pages

Oki ES4191 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info