492990
165
Zoom out
Zoom in
Previous page
1/203
Next page
Other Issues
-165-
Troubleshooting
7
Toner comes off when it
is rubbed.
The settings of media type and
width are incorrect.
Press the <SETTING> key and
select [Paper Setup] > the paper
tray you are using, and then select
the proper values for [Media
Type] and [Media Weight]. Or,
select the thicker values for
[Media Weight].
P. 3 6
The paper is recycled. Press the <SETTING> key and
select [Paper Setup] > the paper
tray you are using, and then select
the thicker values for [Media
Weight].
P. 3 6
Glossiness is not
uniform.
The settings of media type and
width are incorrect.
Press the <SETTING> key and
select [Paper Setup] > the paper
tray you are using, and then select
the proper values for [Media
Type] and [Media Weight]. Or,
select the thicker values for
[Media Weight].
P. 3 6
Black or white dots
appear.
The paper is unsuitable. Use supported paper. -
When the interval of the dots is
about 94 mm (3.7 inches), the
image drum (the green tube) is
damaged or dirty.
Lightly wipe the image drum with a
soft tissue paper.
Replace the image drum when it is
damaged.
P.173
The document glass or the
document holding pad is dirty.
Clean the document glass and the
document holding pad.
P.176
Dirt is printed. The paper is moist. Replace it with new paper. P. 3 2
The paper is unsuitable. Use supported paper. -
The document glass or the
document holding pad is dirty.
Clean the document glass and the
document holding pad.
P.176
The entire page is
printed black.
The machine may be
malfunctioning.
Contact your dealer. -
Nothing is printed. Two or more sheets of paper are
fed simultaneously.
Fan the paper well and load it
again.
P. 3 2
The machine may be
malfunctioning.
Contact your dealer. -
The back side of the document is
being scanned.
Load the document properly. P. 3 8
White patches appear. The paper is moist. Replace it with new paper. P. 3 2
The paper is unsuitable. Use supported paper. -
The document glass is dirty. Clean the document glass. P.176
The entire page is dirty. The document glass is dirty. Clean the document glass. P.176
When the document is double
sided, the image on the back side
is printed through.
When the document is thin, the
back side image may be
printed
through. Lighten the density.
-
The peripheral area of
the page is dirty.
The paper holding roller or the
document holding pad is dirty.
Clean the paper holding roller and
the document holding pad.
P.176
The paper size is bigger than the
size of the document (when the
zoom ratio is set to 100%).
Use paper of the same size as the
document.
-
The orientation of the document
and paper are different.
Set the proper orientation of the
document.
-
The zoom ratio is set improperly. Set the zoom ratio properly
according to the paper size.
-
Symptom Point to check Remedy Reference
165


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4161 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4161

Oki ES4161 User Manual - English - 182 pages

Oki ES4161 User Manual - German - 229 pages

Oki ES4161 User Manual - German - 210 pages

Oki ES4161 User Manual - Dutch - 222 pages

Oki ES4161 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info