492990
164
Zoom out
Zoom in
Previous page
1/203
Next page
Other Issues
-164-
Printed images are light. The toner cartridge is not installed
properly.
Install the toner cartridge properly. P.172
The toner is low. Replace the toner cartridge. P.172
The paper is moist. Use paper stored under proper
temperature and humidity
conditions.
P. 3 1
The paper is unsuitable. Use supported paper. -
The paper is unsuitable.
The settings of media type and
width are incorrect.
Press the <SETTING> key and
select [Paper Setup] > the paper
tray you are using, and then select
the proper values for [Media
Type] and [Media Weight]. Or,
select the thicker values for
[Media Weight].
P. 3 6
The paper is recycled. Press the <SETTING> key and
select [Paper Setup] > the paper
tray you are using, and then select
the thicker values for [Media
Weight].
P. 3 6
Yellow and green are used in the
original document.
If the original data was
transmitted, ask the sender to
change the color of the original
document to black and white.
-
Printed images are
partially faded. White
spots and lines appear.
The paper is too moist or dry. Use paper stored under proper
temperature and humidity
conditions.
P. 3 1
Vertical lines appear. The image drum is damaged. Replace the image drum. P.173
The toner is low. Replace the toner cartridge. P.172
The document glass and paper
feed roller of the ADF are dirty.
Clean the document glass and
paper feed roller.
P.176
Horizontal lines and
spots appear
periodically.
If the interval of lines or spots is
about 94 mm (3.7 inches), the
image drum (the green tube) is
damaged or dirty.
Lightly wipe the image drum with
soft tissue paper.
Replace the image drum if it is
damaged.
P.173
If the interval of lines or spots is
about 40 mm (1.6 inches), foreign
materials may be present on the
image drum.
Open and close the top cover, and
print again.
-
The image drum has been exposed
to light.
Place the image drum back into
the machine and leave it for a few
hours. If it does not solve the
problem, replace the image drum.
P.173
The paper feed path is dirty. Print a few test copies. -
White area of paper is
lightly stained.
The paper contains static
electricity.
Use paper stored under proper
temperature and humidity
conditions.
P. 3 1
The paper is too thick. Use thinner paper. -
The toner is low. Replace the toner cartridge. P.172
Periphery of letters is
smudged.
The LED heads are dirty. Wipe the LED heads with soft
tissue paper.
P.178
The paper is unsuitable. Use recommended paper. -
The paper is moist. Replace it with new paper. P. 3 2
The entire paper area is
lightly stained
when
printing on envelopes or
coated paper.
The toner may be sticking to the
whole area of the envelope or
coated paper.
This is not a malfunction of the
machine.
Coated paper is not recommended.
-
Symptom Point to check Remedy Reference
164


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4161 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4161

Oki ES4161 User Manual - English - 182 pages

Oki ES4161 User Manual - German - 229 pages

Oki ES4161 User Manual - German - 210 pages

Oki ES4161 User Manual - Dutch - 222 pages

Oki ES4161 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info