492960
21
Zoom out
Zoom in
Previous page
1/51
Next page
Printing > 21
> Transparencies with white frames or full-colour transparencies cannot be used.
1. Fan the transparencies to ensure that all sheets are separated.
2. Insert them with the short-edge feed.
3. Slide the length guide and right width guide to the size of the loaded transparencies.
4. On the control panel, change the paper type to Transparency.
5. From the File menu, select Print.
6. Select this printer as the printer to be used and click Properties.
7. Click the Media Type drop down box and click on Transparencies.
8. From the Source drop down select the loaded paper tray.
9. Click the Paper Size drop down and select the size of the original document.
10. Click OK.
11. Click Print in the Print dialog box to start printing.
L
ABELS
You can print labels from any tray.
L
OADING
AND
PRINTING
ON
LABELS
Before loading the labels in the tray, consider the following points:
> Use labels specifically made for laser printers.
> Print only on one side of the sheet of labels.
> Do not load more than 100 labels sheets in Tray 1 or more than 290 in Tray 2, 3
and 4.
> Do not load labels above the fill line; this may cause the printer to jam.
1. Insert the label sheets short-edge feed and face up.
2. Slide the length guide and right width guide to the size of the loaded label sheets.
3. On the control panel, change the paper type to Labels.
4. From the File menu, select Print.
5. Select this printer as the printer to be used and click Properties.
6. Click the Media Type drop down box and click on Labels.
NOTE
Printing transparencies continuously may lead to the output transparencies
sticking to each other. As a guide, remove the transparencies from the output
tray after about 20 sheets and then fan them to lower their temperatures.
NOTE
> You must set Auto-sense to Off before setting the paper type.
> You can also change the settings using the EWS.
NOTE
> You must set Auto-sense to Off before setting the paper type.
> You can also change the settings using the EWS.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B730 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info