Instructions for use and assembly LIB006R05 Edition: 05-2005
Chapter 7 Child’s bicycle seat OKBABY SIRIUS Page 72 Chapter 8 Child’s bicycle seat OKBABY SIRIUS Page 73
Instructions for use and assembly LIB006R05 Edition: 05-2005
DANGER! When you have fastened
the child’s feet, it is very important to see
if the child is able to free them on its own
pulling the child's leg up.
DANGER! The child may manage
to easily pull out its feet out of its shoes,
leaving them fixed to the footrest by the
strap 22. To prevent this from happening,
always check that your child’s shoe is
securely laced onto its foot.
DANGER! After having put the child
in the seat, ensure that the seat is slightly
inclined towards the rear to avoid the
child slipping forwards and possibly
slipping out of the seat. Then make sure
that the backrest of the child’s seat is
adjusted slightly inclined to the rear.
Illustration 4a:
Fasten the child’s belt.
Adjust the height and length of the belt
according to the child’s height.
Set the height of the belt:
the belts can be extracted to adjust the
height, each time pushing the stop behind
the backrest through the opening.
Depending on the child’s height, select the
upper or lower openings to fix the belts.
Adjust the length of the belt:
move the length of the belts by sliding the
buckles of the belt. The belts must be
fastened firmly without the child being too
tight.
Fasten the belt system:
Close the belt.
Check that the fastening of the belt snaps
correctly into position, pulling the belt
after the snap.
DANGER! The fastening of the belt
is an important element for safety and
must be inserted in all cases. The correct
fastening must be checked before each
ride! The life of a child who is not secured
is in danger!
Illustration 4b:
Undoing the belts.
Press the two lateral buttons and the
central one on the fastening
simultaneously. The fastening is
unblocked.
IMPORTANT/NOTE: To ensure maximum
safety, it has been made slightly difficult
to unblock the belt.
8 Optional accessories
Fixing block no. 37420200
The support arm is not supplied with the
fixing block.
Diameter of frame 28-40 mm
(round section)
Diameter of frame 20-40 mm
(elliptical section)
Fixing block no. 37410200
The support arm is not supplied with the
fixing block.
Diameter of frame 28-40 mm
(round section)
Mounting bracket
ENGLISH
ENGLISH
Nr. 37430100
bike frames with
rear rake. Nr. 37430200
bike frames with
front rake. Nr. 37430700
small bike frames
for ladies’ bikes.
Nr. 37430000
standard bike
frames
