782907
15
Zoom out
Zoom in
Previous page
1/93
Next page
15 eN
USB mode
14 Connect a USB drive to the USB socket.
1. Select USB mode (USb).
2. The system is scanning the USB drive and starts playing the rst song automatically.
3. The playback can be controlled in the same way as for CD player. All basic functions as play/
pause , skipping songs forward or are available.
Note: All songs to be played shall be in one folder on USB drive. Music which is saved in subfolders
cannot be played. The order of playing is given by the order of songs in folder.
Note: Connect the USB device directly to the USB port of the unit. Using an extension cable is not
recommended and may cause interference and failure of data transfer. This product supports USB
1.1 and 2.0.
AUX IN mode
15 Connect your music player and the product by audio cable with 3.5 mm-stereo jacks.
1. Once both devices are connected you can start playback at your music player.
2. Use the controls of your external audio device to control the playback.
3. The volume can be controlled by VOL/TUNE on the product.
ALARM SET AND ACTIVATE
16 The alarm can only be activated when the product is switched o, i. e. standby mode:
Alarms 1 and 2
1. Press the ALARM button for approx. 2 seconds and select Alarm 1 (AL 1) or Alarm 2 (AL 2).
2. Press ALARM again, adjust the hours with the VOL/TUNE volume control and press ALARM to
conrm. Set the minutes as well and conrm by pressing the ALARM button. Select the Alarm
signal , CD or Radio with the VOL/TUNE volume control and conrm again by
pressing the ALARM button. This completes the setting.
3. The setting of Alarm 1 (AL 1) or Alarm 2 (AL 2) is done in the same way.
4. The alarm times Alarm 1 (AL 1) or Alarm 2 (AL 2) can be activated and deactivated by pressing
the ALARM key several times no matter the device is switched on or o.
5. If alarm starts, press the power button to turn it o.
CLEANING AND CARE
• Disconnect the product from the power supply before cleaning it. Clean the product with a soft, damp
cloth and a mild cleaning agent. Finish by wiping it with a dry cloth. Do not use alcohol, acetone,
benzene, scouring cleansers etc. to clean the product. Do not use hard brushes or metal objects.
• Warning! Never immerse electrical parts of the product in water during cleaning or operation. Never
hold the product under running water.
• Warning! When cleaning, never use solvents or abrasive materials, hard brushes, metallic or sharp
objects. Solvents are harmful to human health and can attack plastic parts, while abrasive cleaning
mechanisms and tools may scratch the surface(s).
IM_OCR100_170907_V03_HR.indb 15 7/9/17 3:04 pm
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OCR 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OCR 100 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info