568771
19
Zoom out
Zoom in
Previous page
1/74
Next page
19
EN
TIMER
The timer can be used as a kitchen timer with alarm function or as a timer. The max. adjustable time is 99
minutes.
With a single tap of the +/– button the value changes by 1 minute. Keep the +/– button pressed, the
value changes with 10-minutes increments.
11
Using the timer as kitchen timer
Note: The kitchen timer function can be used with hotplates o, i.e. without cooking.
1. Turn on the glass ceramic cooktop with the switch
.
2. Use the Timer +/– buttons to set the desired time. The value has been set, the display will ash
for 5 seconds and then the time starts to count down.
• To reset the timer to push the + and buttons at once.
• If time is over, the display shows “--” and you will hear a beep sound for 30 seconds. Press any
button to turn o the beep.
12
Timer function for switching o hotplates
Note: In this mode, a hotplate will automatically turn o after a preset time elapsed. When using
several hotplates simultaneously, the timer function applies to the last selected hob.
1. Turn on the glass ceramic cooktop with the switch
.
2. Set the power level of the relevant hotplate.
3. Thereafter and within a few seconds when the power level ashes on the display set the timer to
the desired time.
• Once the value has been set, the display will ash for 5 seconds and the time count down
starts.
Note: The timer controlled hotplate is indicated by a red dot at the bottom of the
corresponding power level display.
• If the time is over – is shown in display and the corresponding hotplate is switched o.
• Note: Once the timer is activated, the time cannot be changed without reset. Reset the
timer to -- by pushing both + and timer buttons. Thereafter the timer can be set again.
13
Key Lock
The cooktop can be locked against unintentional use (e.g. as child protection). If the lock is
activated all control buttons except
are locked.
• Press the lock button . The display shows Lo and the controls are locked.
• Press the lock button for several seconds to unlock the controls.
14
Residual heat indicator
All hotplates have a residual heat indicator. If the hotplate is o but still hot,
H is shown in each
power level display.
The display turns o when the hotplate cooled down to a safe temperature.
IM_OBH26321_141126_V08_HR.indb 19 26/11/14 9:54 AM
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OBH 26321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OBH 26321 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info