568771

OK OBH 26321 Manual

18
Zoom out
Zoom in
Previous page
1/74
Next page
18
EN
4
Place the cooktop centered into the cutout of working plate. The sealing strip is already adhered to
the underside of the cooktop eld. The edge of the working plate must be smooth and at, so that
the hob seats solidly and the sealing strip provides sucient seal between cooktop and working
plate.
Note:
If the working plate is not smooth, e.g. tiled you need to ll the gaps or joints in the support area of
the seal.
WARNING! Make sure the power cord is not kinked, squeezed or laid over sharp edges. The cable
must be guided to the connection so that it does not touch hot parts of the hob or oven.
5
Mount the four brackets with the screws (4 x brackets and 4 x screws included) from the bottom.
The brackets must be turned into correct position according to the thickness of the board.
TIPS FOR SELECTION OF POTS / PANS
6
• Only use pots/pans with at bottoms, to avoid damaging the hot plate.
• Only use pots/pans, with same or similar size as hotplate to prevent heat loss.
• Always lift pots or pans before moving on the cooktop in order to avoid scratches on the glass.
OPERATION
Conventional use
7
Turn on cooktop by pushing ON/OFF switch
. The displays for power level show --.
8
Put the pot with food on the desired hob.
Note: The pot must be clean and dry outside. Do not turn on the product if there is no pot/pan
placed on the hob.
Push + or – of the desired hotplate to adjust the power level. Follow the symbols
/ / /
above the power level displays in order to operate the correct hotplate.
Note:
• Default setting is power level 5
• If no settings are done at the hotplates are done within one minute after switching ON the
cooktop the product will turn OFF.
• Power level settings can be changed at any time during cooking by using buttons +/–.
9
When the cooking process is nished, turn o the respective hotplates by touching the – button
until “ -- ” is shown in display or by touching + and – at once.
10
To switch OFF the cooktop completely touching the switch
.
Note: The cooktop is provided with automatic power o function. This will automatically switch o
hotplates when they are switched ON without changes about several hours. The power OFF times
are shown in following table:
Power level 1 2 3 4 5 6 7 8 9
Power o time (h) 8 8 8 4 4 4 2 2 2
Note: The cooktop is provided with a temperature sensor and overheat protection in order to
switch OFF hotplates in case of overheating.
IM_OBH26321_141126_V08_HR.indb 18 26/11/14 9:54 AM
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for OK OBH 26321 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of OK OBH 26321 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish as an attachment in your email.

The manual is 3,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info