301443
21
Zoom out
Zoom in
Previous page
1/128
Next page
OGATECH OG-R400
OGATECH OG-R400 21
ENGLISH
9.8.2 To set and select the sending SMS Centre number
From the standby screen, press SMS to open the SMS menu.
Scroll to Settings and press OK.
Press OK to open Service Centres menu.
Scroll to Sending Centre and select OK.
The current stored number will be shown. Press Clear and enter the new number.
Press OK to store the number.
10ADDITIONAL HANDSETS AND BASES
You can subscribe up to 5 handsets on a OGATECH OG-R400 base. Each handset can
register to 4 base stations and the user can select which base he wants to use.
10.1 ADDING A NEW HANDSET
First put the base into registration mode:
Press and hold the paging button on the base until you hear two beeps.
The LED will start to blink on the base for 90 seconds. During that time the base is
ready to register a handset.
On the handset:
Select Menu to open the menu.
Select Registration with the navigator and press OK.
Select Register Handset with the navigator and press OK.
Select the number of the base to be associated with the handset (1 to 4). Confirm by
pressing OK.
Enter the system PIN (0000 by default) and confirm with OK. A series of numbers
appears on the screen, representing the base ID. Confirm with 0K. Your handset is
registered.
10.2 REMOVING A HANDSET
This procedure needs to be carried out on a different handset from the one you want to
uninstall.
Select Menu by pressing the left menu key.
Select Registration with the navigator and press OK.
Select De-register with the navigator and press OK. Enter the system PIN (0000 by
default) and press OK.
Select the handset to uninstall with the navigator and press OK.
10.3 SELECT A BASE
You can switch your OGATECH OG-R400 handset between bases. You can also set it to
automatically base select with the strongest signal. The handset must first be registered with
each base individually.
Press MENU then scroll to Registration and press OK.
Scroll to Select Base then press OK. The current base being used is highlighted.
!! Only needed when you have deregistered a handset or when you bought a
new one !!
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ogatech og r400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ogatech og r400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info