301443
20
Zoom out
Zoom in
Previous page
1/128
Next page
OGATECH OG-R400
20 OGATECH OG-R400
If you keep the pre-set terminal number "0" in your OGATECH OG-R400 and your telephone
number is 123456789, your correspondents can continue to send you SMSs at 123456789.
If you give the terminal a number other than "0", you must tell your correspondents so that
they can continue to send you SMS messages: they will need to affix the terminal number to
your telephone number. E.g. If you give your OGATECH OG-R400 the terminal number "3"
and your telephone number is 12346789, your correspondents will need to send their SMSs
to: 13456789 3.
9.6 SET SMS ALERT TONE
Your handset can play a different melody, a morse beep or a discreet tone to announce a
new text message.
Select Menu and then SMS and confirm with OK.
Select Settings and press OK.
Select SMS Alert. and press OK.
Scroll to Set Alert and press OK.
Select the type of alert you want and press OK to confirm or BACK to return to the
previous menu.
Select ON or OFF and press OK to confirm the setting.
9.7 MEMORY FULL
When the memory is full, you get the screen message "Memory Full". You can no longer
send or receive SMSs. To continue to receive SMSs, you can delete some or all of the
messages. To delete all the messages stored in the "Inbox" and "Outbox":
Select Menu and then SMS and confirm with OK.
Select Delete Messages and press OK.
Select All Messages with the navigator and press OK.
The screen displays: All Messages: Confirm?. Confirm with OK or cancel with Back.
9.8 SMS SERVICE CENTER NUMBERS
To send and receive SMS text messages you need the telephone number of your Network’s
SMS Centre. These numbers have been pre-loaded into the OGATECH OG-R400. You can
also find these numbers on the addendum sheet mentioned per country and per operator. If
you accidentally delete the SEND or RECEIVE SMS Service Centre numbers you will need
to re-enter them in order for your SMS Service to work.
The OGATECH OG-R400 can store 1 SEND SMS Service center numbers which and 1
RECEIVING SMS Service center numbers.
9.8.1 To set the Receiving SMS Centres numbers
From the standby screen, press SMS to open the SMS menu.
Scroll to Settings and press OK.
Press OK to open Service Centres menu.
Scroll to Receive Centre and select OK.
The current stored number will be shown. Press Clear and enter the new number.
Press OK to store the number.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ogatech og r400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ogatech og r400 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info