738186
44
Zoom out
Zoom in
Previous page
1/52
Next page
36
Heart rate readout seems
inaccurate (too high or too low)
(Q47e/Q47ce)
Chest strap
There may be interference with another electrical product (lights, TV,
personal stereo, wireless network, MP3 players, phones, etc.). Turn off any
other electrical product to see if there is interference.
Put water between your skin and the ribbed electrodes on the back of the
chest strap. This can improve the electrical connection.
Another person in the same workout area may be wearing a chest strap.
Have the person relocate to a distance of 3-4 feet away if possible.
The chest strap may be too loose. Adjust the elastic strap so that the strap
is snug against your body.
Have someone else try the transmitter to see if the reading seems accurate
for him/her.
Contact heart rate sensors
Make sure you are grasping the grips firmly and steadily.
Have someone else try the grips to see if the reading seems accurate for
him/her.
If the issue persists, contact your local dealer for service.
Console blinks on / off
Check the power cord connections. Make sure the connections are secure
from the transformer into the machine base and to the wall outlet.
The console connections could be faulty. Refer to the assembly instructions
and check connections.
If the issue persists, contact your local dealer for service.
Fan does not work
The console connections could be faulty. Refer to the assembly instructions
and check connections.
If the issue persists, contact your local dealer for service.
Machine goes into pause mode
after a short time
This is most likely a speed sensor issue; contact your local dealer for
service.
LED lights are always on
Press and hold the Pause/Clear button for five seconds to enter sleep
mode.
LED always toggling
Press the Enter button to stop the LED screen from toggling.
Console LEDs are not bright
enough
Enter User Set-up, by pressing and holding the Level +/– keys for three
seconds.
Press any +/– key until “BRIT” displays in the matrix window.
Press Enter until the LEDs are set at the desired brightness.
Press any +/– key until “EXIT” displays in the matrix window, then press
Enter.
If the brightness is set to “8” (the brightest level) and the LEDs are still dim,
contact your local dealer for service.
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Octane Fitness Q47e at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Octane Fitness Q47e in the language / languages: English as an attachment in your email.

The manual is 3,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info