738196
20
Zoom out
Zoom in
Previous page
1/28
Next page
20
Unitdoesn’tpowerup
Is the unit plugged in? Check the connection of the power cord from the
machine to the wall outlet.
Is there power from the wall? Plug a lamp or radio into the outlet to see if
the wall outlet has power. Does a light switch control the outlet? If so, turn
it on.
Does the light on the power supply light up?
If the issue persists, contact your local dealer for service.
Consoledisplaysan“Err”code
An error code indicates a potential faulty or improperly installed component
in your elliptical cross trainer. Contact your local dealer for service.
Don’t feel a resistance change
Increase resistance level to 20 and pedal for 30 seconds. If you feel a
difference in the resistance, then the brake is working properly.
Are the cables connected correctly? Unplug and re-connect the console
(you must remove the console from the console mast to do this). When
re-connecting the cables, make sure you feel the connector snap into place
or hear a click that indicates a proper connection.
If the issue persists, contact your local dealer for service.
Console blinks on / off
Check the power cord connections. Make sure the connections are secure
from the transformer into the machine base and also the wall outlet.
Theconsoleconnectioncouldpotentiallybefaulty.Unplugandre-connect
the console (you must remove the console from the console mast to do this).
When re-connecting the cables, make sure you feel the connector snap into
place or hear a click that indicates a proper connection.
If the issue persists, contact your local dealer for service.
Machine enters pause mode
after a short period
This is most likely a speed sensor issue; contact your local dealer for
service.
LED lights are always on
Press and hold the Pause/Clear button for five seconds to enter sleep
mode.
LED always toggling
Press the Enter button to stop the LED screen from toggling.
TROUBLESHOOTING/
FAQs
Electronic Issues
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Octane Fitness Q35 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Octane Fitness Q35 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Octane Fitness Q35

Octane Fitness Q35 Installation Guide - English - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info