551838
10
Zoom out
Zoom in
Previous page
1/68
Next page
10
OC1 OPERATING MANUAL
© 2002 Design, 2009 Doc. No. 12-2761-r04 (9/6/11)
POWER SUPPLY
• OC1 (Watch) Battery >> (1) 3 vdc, CR2450, Lithium battery
• Shelf life >> up to 7 years (when shipped from factory in Deep Sleep mode)
• OC1 use life >> 1 year or 300 dive hours if (2) 1 hour dives per dive day
• TMT (Transmitter) Battery >> (1) 3 vdc, CR2, .75 Ahr, Lithium battery
• TMT use life >> 300 dive hours if (2) 1 hour dives per dive day
• Replacement >> user replaceable (annual recommended)
Battery icon (OC1 only):
• Warning >> icon on solid < 2.75 volts, battery change recommended
• Alarm >> icon on flashing < 2.50 volts, change the battery
BATTERY STATUS
To access, while viewing NORM (or GAUG) SURF Main >>
• M (< 2 sec) to access Menu
• A (< 2 sec), repeat until ( > ) is next to BATT/TMT
• S (< 2 sec) activates Receiver, then OC1 Status appears for 3 sec (Fig. 1A), then each TMT Status for 3 sec (Fig. 1B).
OC1 LOW BATTERY WHILE ON THE SURFACE
<= 2.75 volts (warning level)
• Backlight is completely disabled.
• Battery icon (shell with inner bar) appears solid (Fig. 2a).
• If a dive is started, the icon is not displayed on the dive mode screens.
• Watch and DC functions, including Compass Mode, continue to be available.
<=2.50 volts (Too Low - alarm level)
• All DC operations cease and unit operates only as a Watch with Compass (view only).
• Low Battery icon (shell only with no inner bar) flashes for 5 seconds and operation reverts to Watch Time with Compass
allowed (view only) until the Battery is changed or voltage cannot sustain operation, then the graphic CHANGE BATTERY
flashes (Fig. 3) until the Battery is changed or voltage drops to the level at which operation cannot be maintained.
OC1 LOW BATTERY DURING A DIVE
<= 2.75 volts (warning level)
• Backlight is completely disabled.
• Full DC functions and Compass continue to be available.
• Battery icon is not displayed on the dive mode screens.
• Battery icon (shell with inner bar) appears solid upon entry into Surface Mode.
<= 2.50 volts (Too Low - alarm level)
• Backlight is completely disabled.
• Full DC functions continue to be available during the dive.
• Battery icon is not displayed on the dive mode screens.
• Upon entry into Surface Mode, the Battery icon (shell only with no inner bar) and graphic CHANGE BATTERY flash for
5 seconds (Fig. 4) and operation reverts to Watch Time (Fig. 5), with Compass (view only) allowed, until the Battery is
changed or voltage cannot sustain operation, then the graphic CHANGE BATTERY flashes until the Battery is changed or
voltage drops to the level at which operation cannot be maintained.
TMT (TRANSMITTER) LOW BATTERY
Indication is provided only while on the surface.
<= 2.75 volts (warning level)
• The graphics TMTx BATT and LO appear solid on the Battery Status screen (Fig. 6).
• DC functions continue to be available (surface and dive).
<= 2.50 volts (Too Low - alarm level)
• The graphics TMTx BATT and LO alternate with the graphics DIVE xx and NORM (or GAUG) on the NORM (or GAUG)
SURF Main screen (Fig. 7).
• The graphics TMTx BATT and LO also flash on the Battery Status screen.
• TMT operation continues until Tank Pressure decreases to 50 PSI.
Fig. 1A - OC1 BATTERY
STATUS
Fig. 1B - TMT BATTERY
STATUS
Fig. 2 - OC1 LOW BATT
WARNING
Fig. 3 - OC1 LOW BATT
ALARM
a
Fig. 4 - LOW BATT ALARM
(after surfacing)
Fig. 5 - WATCH MODE
(Low Batt Alarm)
Fig. 6 - TMT BATT STATUS
Fig. 7 - NORM SURF MAIN
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic OC1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic OC1 in the language / languages: English as an attachment in your email.

The manual is 8,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic OC1

Oceanic OC1 User Manual - English - 180 pages

Oceanic OC1 Additional guide - German - 2 pages

Oceanic OC1 Quick start guide - German - 2 pages

Oceanic OC1 User Manual - German - 68 pages

Oceanic OC1 Additional guide - French - 2 pages

Oceanic OC1 Quick start guide - French - 2 pages

Oceanic OC1 User Manual - French - 68 pages

Oceanic OC1 Additional guide - Italian - 2 pages

Oceanic OC1 User Manual - Italian - 68 pages

Oceanic OC1 User Manual - Turkish - 180 pages

Oceanic OC1 User Manual - Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info