Manual Oceanic DIN USA Converter (page 8 of 12) (English)

550341

Zoom out

Zoom in

1/12

O2 Tech Reg

CARE AND MAINTENANCE

TRANSPORT and STORAGE

If possible, transport your Regulator Assembly (preferably dry) in a padded carry-

ing case or equipment bag separated from sharp items (i.e., dive knife, spear

gun, etc.) that might damage or scratch the components. You should also protect

the Second Stages from damage from heavy objects (i.e., dive light, first stage,

etc.).

Prior to storing your Regulator:

• Ensure that the complete Regulator is clean and dry.

• If you were unable to clean the Regulator prior to transport, or if it became

exposed to other equipment that was not thoroughly cleaned prior to trans-

port (such as a BC or Wet Suit), clean it thoroughly and allow it to dry natu-

rally as previously described.

POST DIVE CARE

As soon as possible at the end of each day of diving:

• Install the DIN Thread Protector Cap).

• If possible, immerse the entire Regulator Assembly in a warm fresh water

bath and soak for one hour, preferably while pressurized. DO NOT de-

press the Second Stage Purge Button while the Regulator is soaking. Doing

so will allow water to flow into the sealed portion of the First Stage.

• Remove from the bath and rinse all components of the Assembly with slow

running fresh water. DO NOT use full water pressure.

• Flush the ambient openings of the First Stage and the exterior of all compo-

nents thoroughly to remove dissolved salt and other contaminants.

• Flush the Second Stage by running water into the Mouthpiece and out the

Exhaust Ports. DO NOT depress the Purge Button while rinsing., doing so

will allow water to enter the First Stage.

• If possible, lay the complete Assembly flat in a cool, dry place (out of di-

rect sunlight) and allow the components to dry naturally.

• DO NOT inject or spray Lubricants into or onto the First and Second Stages.

Doing so can attract contamination that may subsequently interfere with

proper operation.

REPAIRS and SERVICE

WARNING: DO NOT attempt to disassemble or repair the

First or Second Stages, or to adjust the First Stage. Doing so

could cause malfunction while underwater resulting in

serious injury or death. It will also void the Regulator's

limited warranty.

Only the Oceanic factory can service an O2 tech Reg that is

used with breathing gases containing greater than 40% O2.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic DIN USA Converter in the language / languages: English as an attachment in your email.

The manual is 0,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic DIN USA Converter Manual

Product: