550349

Oceanic Atom 3.0 Manual

11
Zoom out
Zoom in
Previous page
1/56
Next page
11
ATOM 3.0 OPERATING MANUAL
© 2002 Design, 2011 Doc. No. 12-5216-r02 (9/6/11)
SHOW DUAL TIME
This selection allows Dual Time, which is set by an hour differential, to be added, or removed from, to the Watch Main screen.
Dual Time Lead-in, information includes (Fig. 10):
> Graphics Goto, SHOW, and DUAL.
• S (< 2 sec) - to access Show Dual Time.
• A (< 2 sec) - to step forward to CDT Lead-in.
• M (< 2 sec) - to step back to Watch ALT.
Show Dual Time, information includes (Fig. 11):
> Graphic YES (or NO) flashing, or 2 dashes ( - - ) if no differential is set.
> Graphics SHOW and DUAL with icon.
• A or M (< 2 sec) - to toggle between YES and NO.
• S (< 2 sec) - to save the setting and revert to Lead-in.
• S (2 sec) - to step back to Lead-in, if no setting change.
WATCH CDT (Countdown Timer)
This selection provides access to a CDT for use in Watch mode.
Upon accessing a dive computer mode, Watch CDT operation will be terminated and the time reset to the previous setting.
CDT Lead-in, information includes (Fig. 12):
> Graphics Goto and CDT.
• S (< 2 sec) - to access CDT Status.
• A (< 2 sec) - to step forward to Chrono Lead-in.
• M (< 2 sec) - to step back to Dual Time Lead-in.
CDT Status, information includes (Fig. 13):
> Graphic OFF (or ON) flashing. If OFF, 0:00 or the CDT if previously set. If ON, the remaining CDT (hr:min).
> Graphic CDT.
• A (< 2 sec) - to step forward through selections of OFF, ON, and SET.
• M (< 2 sec) - to step back through selections.
• S (< 2 sec) - to save the selection.
>> If OFF or ON is selected, revert to the Lead-in screen.
>> If SET is selected, access the Set CDT screen.
• S (2 sec) - to revert to CDT Lead-in, if no setting change.
Set CDT, information includes (Fig. 14):
> Graphics SEt and CDT.
> Timer setting (hr:min), with Hour digits flashing.
• A (hold) - to scroll upward through Hour Set Points (8/sec) from 0: to 23: in increments of 1: (hr).
• A (< 2 sec) - to step upward through Hour Set Points.
• M (< 2 sec) - to step back through Set Points.
• S (< 2 sec) - to save the Hour setting and flash the Minute digits.
• A (hold) - to scroll upward through Minute Set Points (8/sec) from :00 to :59 in increments of :01 (min).
• A (< 2 sec) - to step upward through Minute Set Points.
• M (< 2 sec) - to step back through Set Points one at a time.
• S (< 2 sec) - to save the CDT setting and revert to the CDT Status screen with the graphic SEt flashing (Fig. 15).
> ON will then start the countdown and revert to CDT Lead-in.
> OFF will save the setting and revert to CDT Lead-in.
The CDT will run in the background until it counts down to 0:00, or it is set OFF, or DC Mode is accessed or a Dive is started in
which case the countdown will terminate and revert to OFF.
When a set CDT reaches 0:00, the Audible will sound during which time the graphic CDT will flash on the Watch Main.
Fig. 11 - SHOW DUAL TIME
(to add to Main)
Fig. 12 - CDT LEAD - IN
(to access CDT Status)
Fig. 13 - CDT STATUS
Fig. 14 - SET CDT
(after access from Status)
Fig. 15 - CDT STATUS
(after being set)
Fig. 10 - DUAL TIME LEAD - IN
(to access Show)
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic Atom 3.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Atom 3.0 in the language / languages: English as an attachment in your email.

The manual is 12,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic Atom 3.0

Oceanic Atom 3.0 Quick start guide - English - 2 pages

Oceanic Atom 3.0 User Manual - German - 56 pages

Oceanic Atom 3.0 Quick start guide - French - 2 pages

Oceanic Atom 3.0 User Manual - French - 56 pages

Oceanic Atom 3.0 Quick start guide - Italian - 2 pages

Oceanic Atom 3.0 User Manual - Italian - 56 pages

Oceanic Atom 3.0 User Manual - Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info