Manual Oceanic Atom 3.0 (page 9 of 56) (English)

550349

Zoom out

Zoom in

1/56

ATOM 3.0 OPERATING MANUAL

POWER SUPPLY

• Watch Battery >> (1) 3 vdc, CR2430, Lithium battery.

• Shelf life >> up to 7 years (when shipped from factory in Deep Sleep mode).

• Use life >> 1 year or 300 dive hours if (2) 1 hour dives per dive day.

• TMT (Transmitter) Battery >> (1) 3 vdc, CR2, .75 Ahr, Lithium battery.

• Use life >> 300 dive hours if (2) 1 hour dives per dive day.

• Replacement >> user replaceable (annual recommended).

Battery icon (applies to ATOM 3.0 only, not TMTs):

• Warning >> icon on solid < 2.75 volts, battery change recommended.

• Alarm >> icon on ﬂashing < 2.50 volts, change the battery.

BATTERY STATUS (Fig. 1)

To access, while viewing NORM (or GAUG) SURF Main >>

• M (< 2 sec) to access Menu.

• A (< 2 sec), repeat until the BATT/TMT Lead-in screen. appears displaying the graphics Goto bAtt TMT (A).

• S (< 2 sec), while viewing the Goto, activates Receiver, then ATOM Status screen appears for 3 sec (B), then each active

TMT's Status screen for 3 sec (C).

ATOM 3.0 LOW BATTERY WHILE ON THE SURFACE

<= 2.75 volts (warning level)

• Backlight is completely disabled.

• Battery icon (shell with inner bar) appears solid on the Watch and DC Surface Main screens (Fig. 2a).

• If a dive is started, the icon is not displayed on the dive mode screens.

• Watch and DC functions continue to be available.

<=2.50 volts (Too Low - alarm level)

• All operations as a DC (dive computer) are terminated and the unit operates only as a Watch.

• Low Battery icon (shell only with no inner bar) ﬂashes for 5 seconds and operation reverts to Watch Time (Fig. 3) until the

Battery is changed or voltage cannot sustain operation (< 2.35 volts) and the unit turns off.

ATOM 3.0 LOW BATTERY DURING A DIVE

<= 2.75 volts (warning level)

• Backlight is completely disabled.

• Full DC functions continue to be available.

• Battery icon is not displayed on the dive mode screens.

• Battery icon (shell with inner bar) appears solid upon entry into Surface Mode.

<= 2.50 volts (Too Low - alarm level)

• Backlight is completely disabled.

• Full DC functions continue to be available during the dive.

• Battery icon is not displayed on the dive mode screens.

• Upon entry into Surface Mode, the Battery icon (shell only with no inner bar) ﬂashes for 5 seconds during which the

graphics CHG and bAt alternate (Fig. 4) and operation reverts to Watch Time (page 18) until the Battery is changed or

voltage cannot sustain operation (< 2.35 volts) and the unit turns off.

TMT (TRANSMITTER) LOW BATTERY

Indication is only provided while on the surface.

<= 2.75 volts (warning level)

• The graphics bAtt, LOW, and TMTx with icon appear solid on the Battery Status screen (Fig. 5).

• DC functions continue to be available (surface and dive).

<= 2.50 volts (Too Low - alarm level)

• The graphic TMT1 alternates with the graphic BATT LO in place of Pressure on the NORM (or GAUG) SURF Main screen

(Fig. 6).

• The graphics bAtt, LOW, and TMTx with icon also ﬂash on the Battery Status screen.

• TMT operation continues until Tank Pressure decreases to 50 PSI.

Fig. 1 - BATTERY STATUS

Fig. 3 - WATCH MAIN

(low battery alarm)

Fig. 2 - SURF MAIN

(low battery warning)

Fig. 4 - SURF MAIN

(low battery alarm during dive)

alt w/

bAt

Fig. 5 - TMT BATT STATUS

(low battery warning)

Fig. 6 - SURF MAIN

(TMT low battery alarm)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Atom 3.0 in the language / languages: English as an attachment in your email.

The manual is 12,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oceanic Atom 3.0

Oceanic Atom 3.0 Quick start guide - English - 2 pages

Oceanic Atom 3.0 User Manual - German - 56 pages

Oceanic Atom 3.0 Quick start guide - French - 2 pages

Oceanic Atom 3.0 User Manual - French - 56 pages

Oceanic Atom 3.0 Quick start guide - Italian - 2 pages

Oceanic Atom 3.0 User Manual - Italian - 56 pages

Oceanic Atom 3.0 User Manual - Spanish - 56 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oceanic Atom 3.0 Manual

Product: