554357
137
Zoom out
Zoom in
Previous page
1/152
Next page
137
TRANSMITTER INSTALLATION on REGULATOR
To install the Transmitter on the Regulator First Stage:
• Remove the existing Pressure Gauge and High Pressure Hose,
or the High Pressure Port Plug from the Port marked HP using
the proper size Hex Key.
• Lightly lubricate the O-ring and Threads of the Transmitter
fitting with a halocarbon based lubricant such as Christo-Lube
MCG111 (provided in Oceanic Battery Kits).
• Thread the Transmitter clockwise by hand into the Regulator's
HP Port (Fig. 127) and tighten until secure with a 5/8" open-
end wrench.
• Attach the Regulator First Stage to a full Scuba Tank and
pressurize by slowly opening the Tank Valve, listening for any
indication of air leaking around the Fitting.
• If air leakage is present, DO NOT use, take the complete
Regulator Assembly to an Authorized Oceanic dealer for
inspection and service.
TRANSMITTER COMPATIBILITY WITH NITROX
When packaged and shipped from the factory, Oceanic ATOM
Transmitters are rated for use with compressed Air and/or
nitrogen-oxygen (Nitrox) breathing gas mixtures containing up to
99% O2 by volume and with 100% O2.
Fig. 127 -Threading
Transmitter into Regulator
137


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oceanic Atom 1.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oceanic Atom 1.0 in the language / languages: English as an attachment in your email.

The manual is 2,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info