Oce OP40 Operation Guide Printing System Functions Manual
84
Zoom out
Zoom in
Previous page
1/102
Next page
2-8
2. Windows KX Driver
2-6Output Tab
■Output to:
Specifies the location of ejection of printed copies.
Selection is possible when the optional output devices are installed.
[Printer Default] ...................................Copies will be ejected into the location that is selected in the “Stack select” setting of the printer as
the place where the printed paper will be ejected.
[Inner Tray]...........................................Copies will be ejected onto the Inner tray.
[Separator Tray]...................................Copies will be ejected into the optional Job Separator.
[Finishing Tray]....................................Copies will be ejected into the optional Internal Finisher.
[Main Tray]...........................................Copies will be ejected into the lower tray of the optional Finisher.
[Sub Tray].............................................Copies will be ejected into the upper tray of the optional Finisher.
[Finisher Tray (Face-Down)]...............Copies will be ejected face down into the optional Booklet Stitcher.
[Finisher Tray (Face-Up)] ....................Copies will be ejected face up into the optional Booklet Stitcher.
[Mailbox (Face-Down)]........................Copies will be ejected face down into the optional Mailbox.
[Mailbox (Face-Up)].............................Copies will be ejected face up into the optional Mailbox.
*If you designate a setting other than [Inner Tray] as the location of ejection, it is necessary to first perform the setting for that optional
equipment under “Device Options” on page 2-15.
■Copies
Specifies the number of prints to be made. Select between 1 and 999 copies by clicking on the arrows at the right of the field or by typing
the desired number directly into the field. The factory default setting is “1”.
■Collate
When you are printing more than one copy of one or more pages, it is possible to sort the printed copy sets.
*When you want to make multiple copy sets, put a check mark in checkbox next to [RAM Disk] under the “Device Settings” Tab and set
the memory size for the RAM disk. (Be sure to enter the same setting as that made in the printer.)
If, however, the optional hard disk is installed, put a check mark in checkbox next to [Hard Disk].
*If you select to turn on the “Staple” setting (see page 2-9), it is necessary to select “Collate” here.
Example:If the “Collate” option is selected, it is possible to print out 2 sets of the same copies.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Oce OP40 Operation Guide Printing System Functions at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Oce OP40 Operation Guide Printing System Functions in the language / languages: English as an attachment in your email.
The manual is 6,58 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
