47393

Oce OP1025 Operation Guide Scan System Set-up Manual

16
Zoom out
Zoom in
Previous page
1/32
Next page
Set-up
2-4
8
In the same manner, set Subnet for subnet mask and
Gateway for gateway addresses.
9
Once it is complete to enter all network addresses and
returned to the Scanner setting screen of Step 7, use
the S and T keys to move D to select End and then
press the Enter key.
Note In a network environment with RARP, select RARP and then select On on the Scanner setting
screen. In this case, you will not need to set the IP address manually.
10
For other network settings, use a web browser or Address Editor.
User registration
To use the scanner, user registration is needed in addition to the network setting. User (transmitter)
registration is performed from a web browser or Address Editor. For details, see the Online Manual
<Functions Edition>.
Date/Time and Time Difference
Sets the required area information for the Send E-mail function. The time of day when email is sent
from the scanner is included in the header of that email message as the transmission time. Perform
the following procedure in order to set the date and time in your area, as well as the time difference
to GMT (Greenwich Mean Time).
1
Press the System Menu/Counter key.
2
Use the S and T keys to move D to select Machine
Default and press the Enter key. The password entry
screen will appear.
3
Enter the password using the numeric keys. The
password at the factory default setting is 1600 for the
16 ppm model and 2000 for the 20 ppm model.
4
Use the S and T keys to move D to select Day/Time
and press the Enter key.
5
Use the S and T keys to move D to select the item to
be changed and use the < and > keys to select the
desired setting.
IP address
Subnet
Scanner setting.:
Gateway
200. 200. 200.200
255. 255.255:
:
:
255.
0. 0. 0. 0
End
IP address
Scanner setting.:
Subnet
200. 200.200:
:
200.
255. 255. 255.255
Management
Copy default
Default setting / Counter
Machine default
Enter pin code using # key.
Low power mode c
Key sound ON/OFF
Machine default
Day/Time
：
：
15Min.
On
09：35
：
End
Time
Day/Time
DST
：
：
09：35
OFF
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1025 Operation Guide Scan System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1025 Operation Guide Scan System Set-up in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info