47393

Oce OP1025 Operation Guide Scan System Set-up Manual

15
Zoom out
Zoom in
Previous page
1/32
Next page
Set-up
2-3
Network (TCP/IP) settings
This section explains the procedures to set the network address for the scanner.
Notes • The network address that should be set here will differ depending upon your network
environment. Check with your network administrator BEFORE performing this setting.
• If you are using a DHCP server to set the network addresses, you will not need to change the
IP address and the subnet mask because the DHCP has been enabled (ON) as the factory
default setting.
1
Press the System Menu/Counter key to display the
Default setting screen.
2
Use the S and T keys to move D to select Scan
default and then press the Enter key. The password
entry screen will appear.
3
Enter the password with Numeric keys. The password
at the factory default setting is 1600 for the 16 ppm
model and 2000 for the 20 ppm model.
Notes • If the password matches, the screen will change to the Scanner setting screen.
• Four-digit password can be changed. Refer to the Operetion Guide of machine.
4
Use the S and T keys to move D to select DHCP and
then press the Enter key. Screen will change to the
DHCP/BOOTP setting screen.
5
Use the S and T keys to move D to select 1 Off
and then press the Enter key. Screen will return to the
Scanner setting screen of Step 4.
Note If you are using a DHCP server, select 2 On. In this case, even if you enter each IP address and
subnet mask manually, the entered settings will be ignored.
6
Use the S and T keys to move D to select IP
address and then press the Enter key. Screen will
change to the IP address setting screen.
7
Enter the IP address by every three digits with Numeric
keys. Press > key to move to the following three digits.
Check the entered IP address and then press the
Enter key if it is correct. Screen will return to the
Scanner setting screen of Step 6.
Copy default
Machine default
Default setting / Counter
Scan default
Enter pin code using # key.
Subnet
Scanner setting.:
Gateway
DHCP
255.255.255.255.
255.
On
255. 255. 255.
:
:
:
Off
On
DHCP/BOOTP
>
IP address
Subnet
Scanner setting.:
Gateway
255. 255. 255.255
255. 255. 255.255:
:
:0.0.0.0
IP Address
200 200. . 200200 .
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1025 Operation Guide Scan System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1025 Operation Guide Scan System Set-up in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info