47369

Oce OP1020 Operation Guide Scan System Set-up Manual

26
Zoom out
Zoom in
Previous page
1/32
Next page
Performing the Required Operation at the Scanner
3-6
Scan setting
The scan setting screen is displayed when scanning originals. To carry out the various settings, perform the following
procedures. After completing the scan settings, if you set an original in the scanner and press the Start key, scanning will
start.
A Auto Exposure key — Press this key to select the automatic exposure setting.
B Image concentration adjustment key — Press these keys to select an exposure level.
Notes • 7 levels in the normal mode, 13 levels in the maximum mode.
• If the automatic exposure mode is set, all the exposure indicators are off.
C Auto%/100% key — Press this key when you enable automatic paper orientation selection
depending on the original in the gray scale mode.
D Original Image Type key — Press this key to select the original image type.
Note The Photo mode cannot be selected with the Send E-mail function.
E Original Size key — Press this key to specify the original size.
F Paper Select key — Press this key to specify the transmission (image) size. The scanned
original image will be automatically reduced or enlarged to the specified size.
Note In the gray scale mode, the orientation of paper will be changed with this key. To enable again the
automatic paper orientation selection depending on the original, press the AMS/100% key.
G Scanner Function key — The following settings can be adjusted.
• Resolution
• File type
• Original type
•Auto selection
• Border erase
• Original set direction
• Continuous scanning
• Output by page
Note For details on each setting, see the Online Manual.
H Enter key — Press this key to confirm the setting in various setting screens.
IStart key — Press this key to start scanning.
J Stop/Clear key — Press this key to stop scanning, clear an entered value or return to the
previous screen.
K Scanner key — If you select this key to cancel scan setting, the scan setting screen will
appear.
K
G
C
E
F
H
J
D
A
B
I
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1020 Operation Guide Scan System Set-up at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1020 Operation Guide Scan System Set-up in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info