Manual Oce OP1020 Operation Guide Scan System Set-up (page 25 of 32) (English)

47369

Zoom out

Zoom in

1/32

Performing the Required Operation at the Scanner

3-5

When performing the scanning operation at your computer

Run the TWAIN Source in the corresponding application. The main dialogue box for the TWAIN

Source will appear. Make any settings that you want, and put a check mark in the [Waiting Scan]

checkbox.

Click on the [Connect] button in the main dialogue box and, once the connection to the scanner is

made, click on the [Scan] button.

Note Putting a check mark in the [Waiting Scan] checkbox will allow you to start the actual scanning

operation by pressing the Start key at the scanner.

Set the original that you want to scan in the scanner

and press the Start key. Scanning will begin.

Notes • Scan settings can also be made on the operation panel of the scanner. Change any settings

there that you want.

• If you enter different settings in your computer and in the scanner, the settings made on the

operation panel of the scanner will take priority.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1020 Operation Guide Scan System Set-up in the language / languages: English as an attachment in your email.

The manual is 1,72 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oce OP1020 Operation Guide Scan System Set-up Manual

Product: