47312

Oce OP1016 Advanced Operation Guide Manual

141
Zoom out
Zoom in
Previous page
1/162
Next page
Appendix
ADVANCED OPERATION GUIDE Appendix-9
• Unpack the envelopes just before using them, do not use envelopes
which have been left out for a long time.
• Do not use any envelopes on which adhesive is exposed. Even if
adhesive is not exposed, if simple peeling of paper exposes adhesive,
do not use such envelopes. If a small piece of paper that covers the
adhesive is peeled in this machine, a serious failure may occur.
• Do not use envelopes with special treatment. Do not use envelopes
with a grommet for winding a string, those with an open window or
those with a window to which film treatment is applied.
• If paper jams occur, load fewer envelopes at a time.
• When printing onto multiple envelopes, avoid stacking more than 10
envelopes in the Output Tray to prevent paper jams.
Thick Paper
Fan the stack of paper and align the edges before loading them in the MP
tray. Some types of paper have rough edges on the back (those are
created when the paper is cut). In this case, put the paper on a flat place
and rub the edges once or twice with, for example, a ruler to smooth them.
Feeding rough edged paper may cause paper jams.
NOTE: If the paper jams even after you smooth it out, load the paper in
the Multi-Bypass Tray with the leading edge raised up a few millimeters as
shown in the illustration below.
Colored Paper
Colored paper should satisfy the same conditions as white bond paper,
refer to Paper Specifications, on page Appendix-2. In addition, the
pigments used in the paper must be able to withstand the heat of fusing
during the printing process (up to 200°C or 392°F).
Preprinted Paper
Preprinted paper should satisfy the same conditions as white bond paper,
refer to Paper Specifications, on page Appendix-2.The preprinted ink must
be able to withstand the heat of fusing during the printing process, and
must not be affected by silicone oil.
Do not use paper with any kind of surface treatment, such as the type of
paper commonly used for calendars.
… 141 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1016 Advanced Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1016 Advanced Operation Guide in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info