47312

Oce OP1016 Advanced Operation Guide Manual

139
Zoom out
Zoom in
Previous page
1/162
Next page
Appendix
ADVANCED OPERATION GUIDE Appendix-7
Since the composition and quality of special paper vary considerably,
special paper is more likely than white bond paper to give trouble during
printing. No liability will be assumed if moisture and so forth given off during
printing on special paper causes harm to the machine or operator.
NOTE: Before purchasing any type of special paper, test a sample on the
machine and check that printing quality is satisfactory.
Transparency
Transparency must be able to withstand the heat of fusing during the
printing process. It should satisfy the conditions in the table below.
To avoid problems, feed transparencies from the Multi-Bypass Tray,
loaded with the long side toward the main body.
If transparency jams frequently, pull the top of the sheet very gently as it
leaves the machine.
Labels
Labels must be fed from the Multi-Bypass Tray.
The basic rule for printing on adhesive labels is that the adhesive must
never come into contact with any part of the machine. Adhesive paper
sticking to the drum or rollers will damage the machine.
Label paper has a structure
comprising of three layers, as
shown in the diagram. The top
sheet is printed on. The adhesive
layer consists of pressure-
sensitive adhesives. The carrier
sheet (also called the linear or
backing sheet) holds the labels
until used. Due to the complexity
of its composition, adhesive-
backed label paper is particularly likely to give printing problems.
Adhesive label paper must be entirely covered by its top sheet, with no
spaces between the individual labels. Labels with spaces in between are
liable to peel off, causing serious paper jam problems.
Item Specification
Tolerance of heat Must tolerate at least 190°C (374°F)
Thickness 0.100 to 0.110 mm (3.9 to 4.3 mils)
Material Polyester
Dimensional accuracy ±0.7 mm (±0.0276 in)
Squareness of corners 90° ±0.2°
Top sheet (white
bond paper)
Adhesive
Carrier sheet
… 139 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oce OP1016 Advanced Operation Guide at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oce OP1016 Advanced Operation Guide in the language / languages: English as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info