703087
7
Zoom out
Zoom in
Previous page
1/91
Next page
8
Keep hands and utensils away from the precision extractor blade
while chopping or blending food to reduce the risk of severe personal
injury or damage to the device. A scraper may be used, but only
when the blender/food chopper is not running and is unplugged.
Do not use the precision extractor blade for grinding dry materials
such as grains, cereal, or coffee.
Do not use the NutriBullet Select outdoors or in inclement weather.
• NEVER blend hot liquids.
SAFETY WARNINGS: EXTRACTING FOR NUTRIBLASTS
THE NUTRIBULLET SELECT IS PROGRAMMED TO RUN FOR 1 MINUTE
IN EACH SELECTED MODE.
• IF THE POWER DOES NOT SHUT OFF AFTER 1 MINUTE DURING ANY
SELECTED MODE, STOP IT MANUALLY BY TURNING THE KNOB TO
OFF OR SIMPLY TWIST THE VESSEL TO THE RIGHT AND LIFT CUP
OFF POWER BASE.
• TO TURN OFF THE MACHINE AT ANY TIME DURING THE CYCLE (G
BUTTON WILL BE GREEN), TURN THE POWER KNOB TO THE UPRIGHT
OFF POSITION OR SIMPLY PUSH DOWN ON THE CUP AND TWIST
TO THE RIGHT AND LIFT THE CUP OFF THE POWER BASE, WHICH
WILL TURN OFF THE UNIT. THE LIGHT WILL STOP GLOWING,
AND THE MOTOR WILL STOP, SIGNIFYING THAT THE POWER IS
OFF. ALWAYS ALLOW THE MOTOR TO STOP COMPLETELY BEFORE
REMOVING THE CUP/ PRECISION EXTRACTOR BLADE. ALWAYS
UNPLUG THE POWER BASE UPON COMPLETION OF USE.
• DO NOT TOUCH COUPLING GEAR DIRECTLY WITH HANDS AFTER USE!
THE COUPLING GEAR IN PRECISION EXTRACTOR BLADE BASE AND
POWER BASE WILL BE HOT!
• DO NOT RUN IN ANY MODE FOR MORE THAN 1 MINUTE INTERVALS.
AFTER INITIAL CYCLE, ALLOW POWER BASE TO SHUT OFF
COMPLETELY AND WAIT FOR 15 SECONDS BEFORE STARTING
ANOTHER CYCLE.
DO NOT RUN FOR MORE THAN 3 CONSECUTIVE 1 MINUTE INTERVALS
WITHOUT ALLOWING THE POWER BASE TO COOL TO PREVENT
OVERHEATING AND ALLOW INGREDIENTS TO SETTLE FOR 2-3
MINUTES AFTER THE 3RD EXTRACTION CYCLE.
POWER BASE IS EQUIPPED WITH AN INTERNAL THERMAL BREAKER
THAT SHUTS OFF THE POWER BASE IF THE UNIT OVERHEATS.
IF THE POWER BASE OVERHEATS AND SHUTS OFF, UNPLUG THE
POWER BASE AND LET IT COOL FOR AN HOUR OR MORE BEFORE
ATTEMPTING TO USE IT AGAIN. POWER BASE WILL RESET WHEN THE
UNIT IS POWERED OFF AND THE THERMAL BREAKER HAS COOLED
DOWN SUFFICIENTLY.
• ALLOW MACHINE TO COOL DOWN FOR 10 MIN AFTER 4-5 CYCLES TO
PREVENT OVERHEATING AND DAMAGING THE UNIT.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NutriBullet Select at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NutriBullet Select in the language / languages: English as an attachment in your email.

The manual is 1,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of NutriBullet Select

NutriBullet Select Quick start guide - English, German, Dutch - 12 pages

NutriBullet Select Quick start guide - Dutch - 1 pages

NutriBullet Select Quick start guide - French, Italian - 12 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info