9
• To prevent leakage, always align and hand-tighten the precision
extractor blade to the vessel or cup prior to inverting it and placing the
assembly on to the motor base.
• TO TURN ON THE NUTRIBULLET SELECT: Choose the desired Mode
by turning the dial to align with the desired mode as indicated on the
NutriBullet Select Power Base. Press the center button. The light will
glow GREEN and the motor will cycle up.
• In Pulse Mode, push and release until you achieve the desired
consistency. For Blend and Crush Modes, once you push the button
it will continuously glow GREEN while it performs the pre-
programmed function. After 1 minute, the light will glow RED and the
motor will power down automatically.
• Note: In the Pulse Mode, the motor will run for a maximum of one
minute while pressing the G-button. After one minute, to reset it to
pulse again, simply rotate the knob back to the OFF position to reset
and then back to the Pulse mode. Always turn the dial so that the
pointer is in pointing to OFF and unplug the unit when processing is
finished.
• Once activated, the unit will run for 1 minute in Blend, Crush and
Variable modes before it automatically turns off. The G-button will stop
glowing green at the end of the 1-minute cycle. To turn off completely
before the cycle is complete, rotate the knob to the upright OFF position.
The light on the G-button will no longer be lit, signifying the power is off.
• In Crush Mode, the unit will turn on and off several times and run
for a total of 75 seconds then stop. To reset, rotate the knob to the
OFF position to reset and then back to crush mode. This is a normal
function of the NutriBullet Select.
• Turn the NutriBullet Select off after each use by rotating the G-button
knob to the upright OFF position. The GREEN light will stop glowing,
signifying power is off.
PITCHER INSTRUCTIONS
• Always attach the precision extractor blade to Pitcher and hand tighten
it to prevent leakage prior to adding ingredients into the pitcher.
• NEVER USE THE PRECISION EXTRACTOR BLADE TO BLEND
WITHOUT LIQUID AS DOING SO MAY DAMAGE THE BLADE.
• Do not use the pitcher on the motor base without the black lid and clear
vent top in place when running the NutriBullet Select.
• Always allow the power base motor and precision extractor blade to
come to a complete stop prior to adding additional ingredients during
the processing period.
• WARNING! NEVER PUT YOUR HANDS IN THE PITCHER WHEN
ATTACHED TO THE POWER BASE AS DOING SO MAY CAUSE
SERIOUS INJURY.
POWER OFF INSTRUCTIONS
• To turn off the machine at any time while running (indicated by the
GREEN glowing G-button), simply press the G-Button. The motor will
stop. Then rotate the knob to the upright OFF position. Always make
sure that the knob is in the upright OFF position and the unit is
unplugged when the machine is not in use.
